EPLAN Data Portal Update 2 / July 2021

PB 10 Eplan 400

August 9, 2021

Since July 30th, in addition to updated data EPLAN are very pleased to announce the following new partners:

New manufacturer catalogs

  •    –   Balluff GmbH (NFPA Data) – 63 new data sets with sensors
  •    –   Dehn + Söhne GmbH & Co. KG (NFPA Data) – 54 new data sets with protection devices

New and update data sets

  •    –   ABB Stotz Kontakt GmbH – 38 new data sets with protection devices and converters
  •    –   Aventics GmbH – 1748 new and 3555 updated data sets with valves and pressure regulators
  •    –   Bosch Rexroth AG – 1 new data set with a motor
  •    –   Danfoss Drives A/S – 64 new data sets with converters
  •    –   Dinkle Enterprise Co., Ltd. – 129 new and 2 updated data sets with terminals
  •    –   ETI Elektroelement d.o.o. – 43 new and 72 updated data sets with protection devices
  •    –   Hitachi Industrial Equipment Systems Co. – 40 new data sets with converters, terminators and filters
  •    –   ifm electronic gmbh – 119 new and 391 updated data sets with cables, PLC, sensors, signal devices, general, transmission paths, lights, switches and pushbuttons
  •    –   Suzhou Inovance Technology Co., Ltd. – 262 new data sets with converters
  •    –   Janitza electronics GmbH – 6 new and 146 updated data sets with converters and measurement devices
  •    –   Leuze electronic GmbH + Co. KG – 75 new data sets with sensors
  •    –   Pilz GmbH & Co. KG – 10 new and 20 updated data sets with PLC
  •    –   Rockwell Automation – 96 new and 4 updated data sets with converters
  •    –   Schneider Electric SA – 50 new and 52 updated data sets with converters, motors, PLC, relays and contactors
  •    –   SEW-EURODRIVE GmbH & Co. KG – 2 updated data sets with converters
  •    –   Siemens AG – 56 new data sets with cables
  •    –   WAGO Kontakttechnik GmbH & Co. KG – 145 new and 302 updated data sets with terminals, PLC, transmission paths, measuring instruments, test devices, user-defined rails, voltage sources and generators

Summary

  •    –   2 new manufacturer
  •    –   18 updated manufacturer
  •    –   2,999 new data sets
  •    –   4,546 updated data sets
  •    –   0 deleted data set
  •    –   3,521 new parts with EDS
  •    –   In total 356,267 parts with EDS

Source

Related Articles

PB 37 Nexans logo 400

Nexans Recognized With Prestigious ‘A’ Score for Climate Change

Nexans has been recognized for leadership in corporate sustainability by global environmental non-profit CDP, securing a place on its prestigious ‘A List’ for tackling climate change.  Nexans was recognized for its actions to cut emissions, mitigate climate risks and develop the low-carbon economy, based on the data reported by the company through CDP’s 2020 climate change questionnaire.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…