LAPP North America to Showcase Tray Cables, Bushings and More at ATX West

PBUS-38-LAPP-PROFINETCord-400.jpg

April 6, 2022

LAPP North America is pleased to announce it will be an exhibitor at ATX West, April 12 to 14, Booth 4454 at the Anaheim Convention Center in Anaheim, California.

LAPP develops and manufactures a full range of industrial cables, connectors and cable tracks that reliably transmit power, control and monitoring signals with the ability to withstand repetitive movements, as well as extreme twisting and bending typical in demanding robotic and automated applications. Highlights of the many new LAPP products making their debut at the show include:

-SKINTOP MULTI-M round multi-cable cable bushing system for applications that have a high packing density. With up to 30 entry points available to accept cables, wires, conduits and pneumatics and media conduits, these units leverage elastic gel technology to provide a large, 4-millimeter clamping range per entry point, making insertions easy and secure.

-ETHERLINE TRAY CAT.7 Ethernet cable for secure, high-speed data transfer of 10 GBit/s up to 328 feet for stationary applications. Pairs are individually foil shielded with an overall braid shield to minimize interference. The cable supports EtherNet/IP, Profinet with four pairs, EtherCAT, Power over Ethernet (IEEE 802.3af) and Power over Ethernet Plus (802.3at).

-ETHERLINE Cordsets that deliver Industrial Ethernet technology using CAT.5e cables. Engineered to operate in harsh manufacturing environments, these small-OD cables feature low-profile overmolding and a 1,000-V nominal rating to meet and exceed the latest NFPA and UL 508A requirements.

Show attendees interested in seeing these and other rugged, high-performance LAPP cables, connectors, cordsets and accessories for automation can stop by Booth 4454 for a demonstration.

For more information, visit LAPP North America www.e.lapp.com/us or LAPP Tannehill www.lapptannehill.com.

Related Articles

EPLAN Data Portal Update September 2024

EPLAN Data Portal Update September 2024

In this update of the EPLAN Data Portal, there are now a total of 507 manufacturers and more than 1,860,000 data sets are available with the latest updates in August and September 2024. New manufacturer catalogs are available from Chenguang Cable, EISELE GmbH, EcoG, Hoshimoto Co. Ltd., Mibu Denki Industrial Co. Ltd., Ouneva Group, People Electric Appliance Co., Ltd., Shanghai UPUN Electric (Group) Co., Ltd., and Suzhou cableplus Technologies Co., Ltd..

PBUS-37-Rockwell-Modex2022-400.jpg

FANUC Demonstrates Automation Solutions for Warehousing and Logistics at Modex 2022

FANUC America will demonstrate two new CRX collaborative robots, and a variety of automation solutions for the warehousing and logistics industries at Modex 2022, March 28-31 in Atlanta, in booth #B6855. FANUC recently expanded its popular series of CRX collaborative robots with the new CRX-5iA, CRX-20iA/L and CRX-25iA.

 

 

 

Ontario Making It Easier to Enter Skilled Trades

Ontario Making It Easier to Enter Skilled Trades

The Ontario government is introducing new policy and legislative measures to attract more young people to the skilled trades, including adding a new apprenticeship pathway and an online job matching platform. These initiatives are designed to promote the skilled trades to youth and workers and help set them on a path to rewarding, well-paying careers as electricians, plumbers, carpenters and other skilled trades.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…