EPLAN Data Portal Update 01 August 2023

August 18, 2023

In this update of the EPLAN Data Portal, there are now a total of 456 manufacturers and more than 1,485,000 data sets available with the update August 11, 2023.

New manufacturer catalogs for Data Portal

  • Doepke Schaltgeräte GmbH – 1,570 new data sets with protection devices

Data Portal updated and new data

  • ABB LTD – 19 new and 9 updated data sets with relays, contactors, converters
  • Banner Engineering Corporation – 27 new data sets with converters, signal devices, sensor, switch and pushbutton
  • Bernstein AG – 54 new and 2 updated data sets with general, cable, sensor, switch and pushbutton
  • Bosch Rexroth AG – 2 new data sets with power supply
  • Cognex Corporation – 15 new data sets with sensors, switches and pushbuttons
  • Danfoss Drives A/S – 24 new data sets with converters
  • ETI Elektroelement d.o.o. – 334 new and 826 updated data sets with electrically-operated mechanical devices, signal devices, relays, contactors, sensor, switch, and pushbutton, transformers, miscellaneous, protection devices
  • ifm electronic gmbh – 2 new and 78 updated data sets with PLC, protection devices
  • Lenze SE – 2 new data sets with voltage sources and generators
  • Murrelektronik GmbH – 9 updated data sets with sensor actuator adapters, PLC
  • NOARK Electric Europe s.r.o. (NFPA Data) – 3,317 new and 45 updated data sets with relays, contactor, pushbutton, circuit breaker
  • Phoenix Contact GmbH & Co. KG – 83 new and 558 updated data sets with terminals, plugs, protection devices
  • Pilz GmbH & Co. KG – 18 new and 35 updated data sets with relays, contactors, cable, PLC, plugs, sensor, switch and pushbutton
  • Rittal GmbH & Co. KG – 286 new and 814 updated data sets with housings, enclosures and lock systems
  • J. Schmalz GmbH – 1 new data set with pumps
  • SEW-EURODRIVE GmbH & Co. KG – 1 new data set with converters
  • Sick AG – 1853 new and 24 updated data sets with sensors, switches and pushbuttons
  • Siemens AG – 6 new data sets with voltage sources and generator
  • SIGMATEK GmbH & Co. KG – 1 new data set with PLC
  • TE Connectivity – 187 new and 1 updated data sets with general and terminals
  • Unex Aparellaje Electrico, S.L. – 9 new and 50 updated data sets with cable ducts
  • WAGO GmbH & Co. KG – 6 updated data sets with terminals
  • Weidmueller Group – 60 new and 1,776 updated data sets with cable, converters, general, plugs and terminals
  • Zhejiang CHINT Electrics Co., Ltd. – 361 new and 9 updated data sets with protection devices

Data Portal Summary

  • 1 new manufacturer
  • 24 updated manufacturer
  • 8,141 new data sets
  • 4,333 updated data sets
  • 6 deleted data sets
  • 7,819 new parts with EDS
  • In total 889,159 parts with EDS
  • In total 304 manufacturers with EDS parts
  • In total 1,487,997 data sets live in EDP

Source

Related Articles

PB-44-Schneider-FoodBeverageWebinar-400.jpg

Schneider Electric Hosts Free, Live Webinar for Food & Beverage Industry

For next-generation Food & Beverage companies, industrial digitization brings improved production and heightened levels of visibility and traceability across the supply chain. The focus is on optimizing operations, making data-based business decisions, and creating tangible results for sustainability performance and cost savings.

 

 

 

Wieland Offers Certified Electrical Safety Engineer (CESE) Certificate Courses

Wieland Offers Certified Electrical Safety Engineer (CESE) Certificate Courses

Certified Electrical Safety Engineer (CESE) certificate courses are the best way to make sure your team is up to speed on the latest laws and standards for functional machine safety in manufacturing. Wieland Electric provides industry recognized SGS-TÜV Saar certification, which covers the functional safety aspects of machinery with a focus on programmable electrical, electronic, and electro-mechanical aspects.

 

 

 

The new SmartROC D65 performs best in the toughest of conditions

The new SmartROC D65 performs best in the toughest of conditions

Norrbottens Bergteknik has extensive experience and expertise in drilling, blasting and reinforcement. The company has invested in four new SmartROC D65 rigs to strengthen its machinery and further develop its drilling projects in Aitik. Two of the rigs are now in place, making Norrbottens Bergteknik one of the first companies in the world to put the new generation SmartROC D65 into production.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Enhancing Food and Beverage Manufacturing with Motion Control

    Enhancing Food and Beverage Manufacturing with Motion Control

    Reliability in automation motion control is crucial for original equipment manufacturers (OEMs), directly influencing machine efficiency and production costs. Key factors such as servo position accuracy, trajectory repeatability, and system efficiency are essential for maintaining high performance and competitiveness. OEMs must balance the addition of advanced features with profitability, ensuring their equipment meets customer expectations… Read More…

  • How to Choose the Right Disconnect Switch

    How to Choose the Right Disconnect Switch

    When it comes to electrical safety, a disconnect switch is essential for protecting people and equipment. This gadget lets you to swiftly and simply turn off power in an emergency or during maintenance, resulting in a safer work environment. Understanding how disconnect switches work will help you make more educated decisions regarding your electrical systems. Read More…