New White Paper from Bedrock Automation Enables Comparison and Calculation of Industrial Control System Lifecycle Costs

Bedrock

Aug 7, 2018

By: Robert Bergman

Bedrock Automation, maker of the Bedrock® Open Secure Automation (OSA) system, has announced the availability of the fifth in its series of white papers supporting implementation of Open Secure Automation (OSA). The new whitepaper, Chapter Five: Industrial Control Systems Life Cycle Cost Analysis – Quantitative Evaluation, delineates 450 different factors that impact costs across the following six phases of the industrial control system (ICS) life cycle: engineering, installation, commissioning, maintenance, system, and cyber security.

“While increasing open connectivity presents many opportunities for business improvement, it also introduces new control challenges. Mainstream vendors are redefining their offerings to address these new opportunities, but each is approaching the situation differently and may not always present all cost factors in a way that they can be compared easily. We built an evaluation guide to help users in the process of evaluating different vendor brands of PLC, SCADA, DCS or other industrial control technology,” said Bedrock founder and CEO Albert Rooyakkers.

The Product Evaluation Method is divided into six sections covering different life cycle phases of an ICS asset. Each section defines the criteria against which different vendor’s offerings can be compared. It also provides ranking scores to enable users to rate each vendor’s offerings based on their ability to meet the specific requirement. The document guides users in totalizing and normalizing the ratings to weigh the raw scores according to their overall contribution to the ICS’s life cycle valuation. An accompanying Excel spreadsheet is available to automatically calculate valuation.

To download the White paper and workbook visit www.bedrockautomation.com/revolution. Previous chapters are available at this link as well.

Related Articles

Preparing Your Facility for Mobile Robots: Key Considerations for Seamless Integration
|

Preparing Your Facility for Mobile Robots: Key Considerations for Seamless Integration

Integrating autonomous mobile robots (AMRs) into your facility can optimize materials transport thanks to the robots’ ability to navigate autonomously, adapt to changing environments, and perform a range of tasks. However, successful AMR implementation requires careful consideration of several key factors: space analysis, floor conditions, and environmental factors, among others.

PB-46-Omron-PurlinStacker-400.jpg

How Omron Helped a Company Safeguard Its Purlin Stacker While Maximizing Uptime

Large and potentially hazardous machinery is a mainstay of many manufacturing companies, and safeguarding is critical in preventing serious accidents. While it’s never acceptable to provide less protection for the sake of boosting productivity, many manufacturers are seeking to determine which solutions offer full protection while maximizing uptime.

 

 

 

Changing Scene

  • Spartan Controls Partners with Northwestern Polytechnic to Empower the Next Generation of Engineers

    Spartan Controls Partners with Northwestern Polytechnic to Empower the Next Generation of Engineers

    Spartan Controls is proud to announce a 15-year partnership with Northwestern Polytechnic (NWP) as the exclusive naming sponsor for the institution’s new $16 million, full-service training and education space. The facility, set to open in summer 2025, will be named the Spartan Controls Northwestern Centre for Industrial Automation & Innovation. Read More…

  • Convergix: Tarriff Communication

    Convergix: Tarriff Communication

    Convergix Announces Tarriff Mitigation Plan. With the recent news regarding tariffs affecting trade between Mexico, Canada, China, and the U.S., and the indication of tariffs being imposed on the U.S. by Canada and Mexico, we want to take a moment to share the steps Convergix is taking to minimize any potential impact on our customers.… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • HELUKABEL: Q & A With HELU – Cable Solutions for Glass Manufacturing

    HELUKABEL: Q & A With HELU – Cable Solutions for Glass Manufacturing

    HELUKABEL Provides Insights Regarding Cable Solutions in Glass Manufacturing. In the glass manufacturing industry, various types of cables play essential roles in powering equipment, monitoring temperatures, and ensuring safe, efficient operations. Due to the high temperatures, heavy machinery, and automation involved in glass production, specialized cables are required to withstand extreme conditions, transmit data reliably,… Read More…

  • Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga

    Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga

    Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga. This intensive five-day course is designed for designers, developers, maintenance engineers, and safety officers seeking to enhance their expertise in functional safety. Participants will gain in-depth knowledge and practical skills to implement functional safety measures throughout the entire CE process in compliance… Read More…