Three Ways to Improve Electrical Safety During a COVID-19 Related Shutdown

April 14, 2020

If your plant is unexpectedly shut down due to the current crisis, you can use this pause in production as an opportunity to review and improve safety procedures. 

Why should you make maintaining your electrical infrastructure a priority? 

  •  –   Improperly maintained equipment increases safety risks
  •  –   Maintaining equipment properly helps to prevent unplanned shutdowns and decrease property risks
  •  –   Even if your equipment is new, it needs a proactive maintenance and service program 

Panduit recently shared tips to help you use downtime as an opportunity to improve communication and engagement around company safety protocols.

Consider these steps to improve electrical safety:

1. Revisit electrical specifications to see where you can introduce new technology

  •  –   New advances in electrical safety technology can not only promote a safer work environment, but also lower costs and help your team become more productive.
  •  –   According to the National Safety Council’s Safety+ Health magazine, the most common cause of arc flash accidents is human error . How can you integrate technology to reduce the chance of mistakes? New permanently installed test equipment is one way to promote a safer environment in your plant.

2. Standardize electrical safety procedures to help establish a company-wide culture of safety 

  •  –   Think about how safety processes are currently implemented throughout your facility. Are there opportunities to make compliance with standards easier, and reduce the chance for human error?
  •  –   Can you improve training for qualified electrical workers? What tools and equipment do they need to become more efficient and do their jobs more safely?
  •  –   Is your messaging consistent with your safety processes? Clarity can increase employee and upper management buy-in.
  •  –   While the plant is shut down, invite floor employees to walk through operations and safety procedures with you, looking for gaps in safety or maintenance. Performing the walk-through together will help employees feel ownership over the process. 
  •  –   Safety procedures can vary by department, shift and/or location. Ask all plant or safety managers and floor employees to take an internal survey or join you on a process walk-through to encourage electrical best practices throughout the facility.

3. Reduce risk and improve efficiencies with Engineering Controls

  •  –   Engineering controls rely on physical changes to the workplace, instead of workers’ behavior, to reduce hazards and human error. A good example is an Absence of Voltage Tester (AVT). 
  •  –   While examining your safety and maintenance processes for opportunities to improve, consult the Hierarchy of Controls . Seek out opportunities for new technologies to introduce an engineering control into a particular process, and make sure to ask for input from your team.
  •  –   In this time of uncertainty, show your commitment to employee safety by using the downtime to review electrical safety on the plant floor. A shutdown provides a unique opportunity to walk through processes as a company, empowering employees to participate in the process and encouraging adoption of proper procedure when business as usual resumes.

Source

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…