The Route to an Autonomous Mine

December 8, 2020

In partnership, Epiroc and Combitech have developed a solution for traffic management of autonomous loaders for mines. The utilization of a driverless fleet of machines in a risky work environment has meant achievement of a new level of efficiency and safety.

“This solution, in which autonomous machines can perform complete assignments and interact with each other in a shared area, is much sought after within the mining industry. It’s a matter of being able to create an even flow of material, avoid locking between machines in production and move employees away from an unsafe environment,” explains Robert Raschperger, consultant for Epiroc and Combitech’s product-development manager.

In 2017, Epiroc and Combitech started to work on this technological leap. Together, they have combined technology from Epiroc and SAAB’s civilian product portfolio with knowledge of the way traffic management is to be systematised and developed. At the end of the same year, a prototype – or a so-called proof of concept – was delivered, and was evaluated in Epiroc’s test mine outside Örebro. Eighteen months later, in spring 2019, the solution was installed and used in an Australian gold mine. The solution is called Epiroc Scooptram Automation Total and is included in Epiroc’s 6th Sense offering.

The technology facilitates increased productivity

The solution’s driver is a proprietary module known as the Traffic Management System (TMS). It allows machines to share roads, service locations and loading and dumping sites without collisions or locking events. The module is generic inasmuch as it is applicable to other autonomous solutions whereby machines, drones and trucks are able to independently perform predefined tasks, e.g. travelling from Point ‘a’ to Point ‘b’, and depositing a load. Epiroc’s strategy is an open automation system that means other machine manufacturers can be integrated into the solution (see press release from Epiroc, link further below).

As well as the TMS module there is the Fleet Management System (FMS), which automates assignment and resource management so that the mine operator can focus on the work to be performed, e.g. transporting 1600 tonnes from Point ‘a’ and dumping it at Point ‘b’. (The system decides which machines to be used, when they should operate and which routes they should take.) The FMS module is based on the SAFE (Situational Awareness For Enhanced security) platform, which has been developed within the Saab group.

The TMS and FMS modules are integrated into the mine’s overall production management, so work orders are received, implemented and reported in order of priority, whilst at the same time the system attends to other machinery and parts of the production flow, e.g. ore crushers and ore transportation systems.

“Interoperability and openness have been key words in the development of Epiroc’s automation system, and thanks to this, the collaboration with a partner like Combitech has also worked extremely well. Besides the technical advancements made and the new functions, which we have succeeded to develop in record time, I’m almost more impressed with our collaboration and partnership. The future of digitalisation and automation development depends on our success in integrating different systems – where collaboration between people and organizations is just as vital as the technical aspects,“ says Mattias Pettersson, Epiroc’s Global Portfolio Manager Underground Loader.

“A key to our success is that our team has different skillsets. Some of us are good at traffic-management logic, i.e. sending data and coordinating traffic patterns. Others are good at acquainting themselves with end-user problems, work culture and human-to-machine interaction. We also have sound expertise in development of systems so they meet the stringent demands around availability in a mine, typically 24/7, plus how modern software development should be set up and managed. It’s enjoyable seeing how knowledge can be used in new ways, and what results are attainable through collaboration,” says Robert Raschperger. 

Focus on safety

Epiroc’s Scooptram Automation Total allows machine operators to do remote work safely, in a control room above ground level, where they can share the overall situation in real time and carry out the tasks that still call for a human being’s experience and precision. The operators have good insight into what is happening within the production environment, and can take over machines as and when necessary, to carry out non-automated tasks.

The latest addition to the solution is the possibility of easy control of the security system that protects employees from harm if they accidentally enter the autonomous production area. Putting it simply, various sections and passageways are permitted to be closed or opened for autonomous operation, allowing the mining operator to send in manned machines without stopping autonomous production any more than is necessary. The function also supports smooth check-in and check-out of autonomous or remote-controlled machinery.

“With this solution we are breaking new ground, as we are bringing manual and autonomous operations closer to each other. A fully autonomous mine is still a long way off, but the latest addition to the solution allows mining companies to actually proceed towards autonomous operation, and increases the degree of utilisation of the investment in infrastructure, machinery and employees,” says Robert Raschperger. 

Source

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…