AutomationDirect Releases New Contrinex M18 Short-Body Photoelectric Sensors and Sensor Tester

AutomationDirect Sensor Thumbnail

August 24, 2021

AutomationDirect has added a new series of Contrinex M18 photoelectric sensors to their ever-growing selection of discrete sensors, as well as a new sensor tester used with various sensor types to verify operation in the field.

The Contrinex M18 sensors are made in the USA and have a short body for easy installation in even the tightest locations. These sensors are available in diffuse, diffuse with adjustable background suppression, retroreflective, and through-beam models, and with NPN and PNP logic. All PNP models are IO-Link® compatible, and all sensor outputs are complementary, allowing them to be used as a light-on or dark-on sensor.

With sensing distances of up to 1200mm, connection options include a 2 meter, 4-wire PVC cable or a 4-pin M12 quick-disconnect.

The AutomationDirect sensor tester can test any DC-powered sensor of any brand for proper functionality. This tool can save time before installation or while troubleshooting.

The new Contrinex photoelectric sensors start at $22.00 with a lifetime warranty and the sensor tester is $70.00 with a two-year warranty.

Learn more by visiting: https://www.automationdirect.com/general-photoelectric

Related Articles

PB 25 Rockwell newlogo 400

It’s 10:00 p.m. Do You Know Where Your Data Is?

What’s the most critical information in your control system network? If you’re like most life sciences OT/IT professionals I meet, you’ll be able to answer that question even before I finish asking it. Identifying critical system data – and recognizing the need to protect it – in many ways is the easy part. But designing a network infrastructure that can both help mitigate cybersecurity risk and take advantage of the latest Internet of Things (IOT) technologies can be a sticking point.

 

 

 

Rockwell Automation Study Reports 85% of Automotive Manufacturers Plan to Maintain or Increase Workforce

Rockwell Automation Study Reports 85% of Automotive Manufacturers Plan to Maintain or Increase Workforce

Rockwell Automation, Inc. has recently announced the results of the 8th annual “State of Smart Manufacturing Report: Automotive Edition”. The global study encompasses the responses of 197 companies from automotive manufacturers, automotive suppliers, and electric vehicle manufacturers across 13 manufacturing countries. This year’s report emphasizes the evolution of the automotive industry with a focus on the pursuit of quality, the impact of process automation, the adoption of smart manufacturing, and the essential role of technology when mitigating risks, navigating workforce challenges, minimizing costs, and boosting production.

PB 26 Allied logo 400

Expert Advice: Myth or Fact – Setting the Record Straight About Private Label Industrial Products

On this episode of the Allied Expert Advice podcast, Neil Harrison, Director of Private Label Products for Allied Electronics plays a game of “Myth or Fact.” Allied customers are asked to send some of the myths and disparagements they hear most often about private label products in the industrial sector and Allied does some fact checking to help set the record straight.

 

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…