Why Integrated Safety is the Right Strategy for Large, Complex Applications

July 7, 2023

During the safety design process for a machine or application, manufacturers must choose whether these measures will be implemented as a standalone or networked (integrated) safety solution. Basic safety solutions can work for smaller-size applications, but when people are talking about large automation production lines, for example, complexity makes these unworkable.

Integrated safety isn’t just a highly effective way to mitigate risk. In fact, it’s a key element in building a high-performing, future-ready manufacturing facility since it’s capable of improving automation efficiency and boosting throughput.

Let’s take a look at the differences between standalone and integrated safety — and why the latter is important for large, highly complex applications.

What goes into a basic (standalone) safety system?

Basic safety involves an input device, a logic device, and an output device. This configuration can be abbreviated as ILO for “input, logic, output.” One input device, one logic device, and one output device constitute a complete standalone system, and each of these will be a discrete device that’s hardwired.

  • An input device — which could be a light curtain, a scanner, a door interlock, a safety mat, or the like — detects human incursion into an automation workspace. E-stops also count as input devices, even if they require a human to purposefully activate them, rather than simply detecting human presence.
  • logic device takes the input, decides whether the input is a valid safety signal, and then makes a safety-related decision to interrupt primary power to a machine and remove any energy that pose a hazard. Examples of such hazards could be machine motion, arc flashes, or high-pressure water.
  • An output device removes the energy from the hazardous situation. For electrical power, the device will usually be contactors. For rotating and/or moving hazards, it might be a clutch brake, which separates a blade from its motor and forces the blade to stop instantly while allowing the motor to coast down.

Detecting human incursion isn’t the only job of a safety system. If a copper wire within the system gets cut, for example, the system will detect that as well, since this could lead to potentially hazardous machine failure or dysfunction within the safety system itself.

Discover Omron’s full range of safety solutions

How integrated safety builds upon the ILO concept

When you’re got a complex production line that has large assemblies with robots lifting heavy parts right and left, there are lots of forces and individual hazards to deal with. Each of these hazards must be considered within the context of the larger system, so that shutting down one machine on the line won’t necessarily result in an entire line stoppage.

The goal here is to create a network integrated safety system where you’re not simply adding a layer of safety over an already-designed production line. To ensure that all hazards are safeguarded and that the line will function as smoothly as possible, safety can’t just be an afterthought. This is where integrated safety comes in.

In integrated safety, you still need input, output, and logic devices, but you combine multiple smaller safety modules into a comprehensive safety “umbrella” that works like an orchestra. All the ILO devices are tied together via a communication network that can quickly communicate any legitimate safety trips. When someone’s limbs (and possibly life) are in danger, speed is key.

Learn about Omron’s safety services

Distributed vs. centralized systems in integrated safety 

Integrated safety systems can be either distributed or centralized. Distributed safety is a lot easier to wire, since wiring distances are shorter and there’s more flexibility in designing the safety matrix (the directions that indicate which energy sources should be shut down for different specific hazards).

Each of these remote hubs would collect the individual wiring inputs from the input devices and then communicate their actions via communications line. Centralized wiring would require running all the leads back to the control panel where the distances, complexity, time, and effort of this would be significantly greater.

Integrated Safety Video

Source

Related Articles


Changing Scene

  • Weidmuller Ltd. Canada Partners with Contact FD as Sales Agents for the Quebec Region

    Weidmuller Ltd. Canada Partners with Contact FD as Sales Agents for the Quebec Region

    Weidmuller Ltd. Canada is pleased to announce the appointment of Contact FD as their new sales agent for the Quebec region. Weidmuller, who has been present in Quebec for 50 years, is eager to partner with Contact FD. With this strategic collaboration, Weidmuller aims to enhance its position and strengthen its connections with clients in… Read More…

  • Mazak Opens New Customer Solutions Center

    Mazak Opens New Customer Solutions Center

    As manufacturers continue to face shortages of skilled labor, Mazak helps them address the issue with the recent opening of its new Customer Solutions Center. The secure facility specializes in the development of production-ready, custom automation solutions that allow manufacturers to overcome existing labor issues while increasing production output. “The new center allows us to… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Factory Automation Supports the Medical Device Industry

    How Factory Automation Supports the Medical Device Industry

    The healthcare industry is among the most highly advanced manufacturing fields in the world, with tight controls and restrictions governing the development and production of medical devices at every stage. At the same time, researchers and developers in the healthcare industry benefit from manufacturing solutions that are flexible, reliable, and innovative. The tension in the… Read More…

  • Festo’s Solutions Prevent Contamination in Lithium-Ion EV Batteries

    Festo’s Solutions Prevent Contamination in Lithium-Ion EV Batteries

    Festo is a trusted, single source supplier for all tasks involving automation of battery manufacturing. They offer a complete line of copper-free, zinc-free, and dry-room-compatible components for battery manufacturing. Today, approximately 95% of electric vehicles (EVs) and energy storage systems use conventional lithium-ion batteries, which require liquid electrolyte filling. Lawrence Lin, Business Development Manager at… Read More…