Rittal Expands Blue e+ Cooling Range to Meet Market Demand

Rittal

January 24, 2018

Rittal is now expanding its range of cooling units with the addition of a device with an output class of 1.6 kW. Besides being 75 percent more energy-efficient than previous cooling solutions on average, the units also excel in terms of connectivity, safety and handling. The new FTTA approval also makes the UL certification process much easier.

To date, the Blue e+ cooling unit series from Rittal has offered an output range of 2 to 6 kW. But from the first quarter of 2018, the company will launch compact units in a lower output class – at 1.6 kW. “This development marks a new breakthrough for our Blue e+ cooling unit range, to meet market requirements for enhanced and more efficient compact cooling units for enclosure climate control,” says Tim Rourke, President, Rittal Systems Ltd.

In addition to the CULUS listing, Rittal cooling units and fan-and-filter units also have a UL listing in the new “FTTA” (Environmental-rated Accessories for Enclosures) category. With FTTA approval, the type rating/IP protection class of the climate-controlled enclosure is certified by UL.

With its Blue e+ cooling unit range, Rittal relies on an innovative, patented hybrid technology. This combines a compressor cooling unit and heat pipe, which provides passive cooling. The control strategy for hybrid operation is a factor that has significant influence on the huge efficiency gains. Moreover, the compression cooling system of the new Blue e+ is range highly energy efficient. Frequency converters precisely adjust the speed of the DC motors for the fans and compressors to achieve the exact cooling output required. They vary the speed of the system’s fans and compressors by voltage control, so allowing the cooling output to be tailored precisely to the requirements at all times. This cuts energy consumption significantly over conventional solutions. “It has been proven that our cooling units make energy savings up to 75% possible, making them the most sustainable and innovative cooling units in the market,” added Tim Rourke.

All these units in the new range can be operated flexibly in all standard grids worldwide thanks to their multi-voltage capability. Permissible input voltage ranges from 110 V (single-phase) to 480 V (three-phase) in conjunction with a mains frequency of 50 Hz or 60 Hz.

Precise, variable-output cooling minimises thermal stress on components. Constant temperature fluctuations, such as in the conventional two-point control systems are now a thing of the past. This not only increases the service life of the cooling units and enclosure components, it also means higher process reliability.

The new graphical touchscreen control panel displays all key information at a glance. System messages appear as plain text and are multi-lingual. Standardised communication interfaces ensure easy integration in a production plant’s control systems. With the new IoT interface, Rittal also enables Blue e+ units to link to customer-owned monitoring, energy management and/or superordinate systems via OPC-UA, Profinet, SNMP, Modbus TCP and CANopen, enabling predictive maintenance, data analytics and more.

Contact Marketing@rittal.ca or visit www.rittal.ca for more information.

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…