PSS67 PLC: The World’s First PLC Controller for Safety and Automation with Protection Type IP67

Pilz

 

August 22, 2018

With PSS67 PLC, the automation company Pilz is launching the first safe PLC controller with protection type IP67. PSS67 PLC can be installed outside the control cabinet, directly on the machine. This means that users can save space, reduce their wiring work and enjoy greater flexibility when implementing decentralised control architectures.

Pilz is the first PLC controller for safety and automation with protection type IP67. Due to its fully encapsulated module electronics, this controller is particularly robust mechanically: It is protected against dust and temporary submersion and can be used for temperatures from -30°C to +60°C.

PSS67 PLC is designed for industrial automation outside the control cabinet. The controller can be installed exactly where it is needed. This reduces the wiring work significantly compared with control cabinet-based systems and increases flexibility when implementing modular plant architectures.

As a safe PLC controller, PSS67 PLC is suitable for applications up to the highest category PL e.
PSS67 PLC is part of the automation system PSS 4000. It is completely compatible with other controllers in the system and is easy to integrate into existing architectures. The well-tried engineering software PAS4000 is available for programming in IEC 61131-3 programming languages as well as the PASmulti Editor. PSS67 PLC has 16 safe digital inputs for the direct connection of sensors and can be combined with the compact module PSS67 I/O from Pilz, which forwards signals from the field. The whole device configuration can be stored on a securely integrated microSD card. This makes it easier to exchange devices, because you only need to change the micro SD card. No reconfiguration is required.

For more information https://www.pilz.com/en-CA/eshop/00102002127155/PSS67-Controller

 

 

Related Articles

Endress+Hauser’s next generation Liquiphant FTL51B point level detector ready for Industry 4.0

Endress+Hauser’s next generation Liquiphant FTL51B point level detector ready for Industry 4.0

Endress+Hauser’s Liquiphant family has been literally first and foremost in vibronic point level detection, installed more than six million times worldwide since the 1980s when it made its debut as an entirely new measuring technology. Today, it’s the go-to technology for most liquid measurement in storage tanks and pipelines. Now, the next generation of the Liquiphant FTL51B is available in a full range of variants designed to meet Industry 4.0 requirements, notably for the addition of a mobile communication capability that can greatly simplify maintenance inspection and safety monitoring and even optimize process efficiency.

 

 

 

AutomationDirect: Leuze 18mm Threaded Front/Bottom Rectangular Photoelectric Sensors

AutomationDirect: Leuze 18mm Threaded Front/Bottom Rectangular Photoelectric Sensors

AutomationDirect has added Leuze 28 series 18mm threaded rectangular sensors that feature flexible mounting options with front and bottom 18mm threads and 3.1mm through-holes, sensing distances up to 10m, and rugged ABS thermoplastic housings with an IP67 protection rating. These new photoelectric sensors are offered in diffuse, polarized retroreflective, and through-beam sensing styles, and in highly visible red LED or infrared models. Leuze 28 series photoelectric sensors are ideal for a variety of industrial applications such as material handling, packaging, wrapping, and sortation.

SIBERprotect Protects Industrial OT Systems with Innovative Cyber Response Solution
| |

SIBERprotect Protects Industrial OT Systems with Innovative Cyber Response Solution

Siemens recently introduced SIBERprotect, an automated, intelligent solution that defends critical infrastructure and OT systems in industrial settings from cyberattacks. This advanced, automatic, response to cyber-attacks can limit the impact of these threats by isolating and quarantining affected equipment and processes. Chuck Tommey, a digital connectivity executive with Siemens, discusses why OT systems need protection from cyberattacks and how SIBERprotect is the solution to defend your operation.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…