POSITAL Incremental Encoders with Space-Saving Angled Cable Entry

Posital

 

September 24, 2018

Position and motion sensor specialist POSITAL has announced that its popular IXARC incremental encoders will be available with a special housing that features a cable entry angled at 45° to the device’s axis. This compact design combines features of both axial and radial cable entries in a single unit, providing the installer with more flexibility when laying out the connection cable – a real plus in tight spaces!

The new encoder models share the advantages of other IXARC incremental encoders. The core magnetic measurement technology is rugged and accurate, with excellent dynamic response. A wide variety of flange and shaft configurations are available, reducing the need for costly adaptors or work-around. A water and dust-tight grommet around the cable entry ensures that these devices meet IP65 level ingress protection. The housing is 36mm in diameter and 32mm long.

IXARC incremental encoders are programmable: resolution can be set anywhere from one to 16,384 pulses-per-turn in software without requiring any changes to the mechanical properties of the devices. Similarly, pulse direction and the output driver – either Push-Pull (HTL) or RS422 (TTL) – can be defined through software parameters. Changes can be made quickly in the field or in the shop using POSITAL’s easy-to-use UBIFAST programming tool.

POSITAL makes it easy for customers to find the right IXARC incremental encoder for their specific application. The product finder tool at www.posital.com enables a customer to specify the product features required for their project and quickly zero in on the most suitable products.

 

 

Related Articles

Siemens Launches New SIMATIC Workstation, a Breakthrough in Automation Technology

Siemens Launches New SIMATIC Workstation, a Breakthrough in Automation Technology

Siemens has announced a breakthrough in the longstanding challenge of closely managing numerous hardware control points throughout the factory. The “SIMATIC Automation Workstation,” allows manufacturers to replace a hardware PLC, a conventional HMI and an edge device with a single, software-based workstation. This ushers in Internet Technology (IT) workflows to Operational Technology (OT) environments.

Festo Didactic’s Digital Portal Makes New, Individualized Learning Experiences Possible

Festo Didactic’s Digital Portal Makes New, Individualized Learning Experiences Possible

Festo Didactic developed a digital portal – the Festo Learning Experience, or Festo LX – to make it easier to create individual learning experiences for trainers and trainees. Digitalization is changing the way people learn, and not just because in-person learning became so difficult with pandemic lockdowns. Trends such as mobile, micro, adaptive, and virtual reality learning were already beginning to exert an influence in technical education and training. To further these and other trends, Festo Didactic developed a digital learning portal – the Festo Learning Experience, or Festo LX – to make it easier to create individual learning experiences for trainers and trainees.

The New Modular Drive Platform for Your AGV and AGC System – “Ket-Rob” From Ketterer

The New Modular Drive Platform for Your AGV and AGC System – “Ket-Rob” From Ketterer

The abundance of possibilities for efficient application with an autonomous AGV / AGC system can be difficult to manage, even for experts. This raises the question of a solution with which new ideas and strategies for the use of an autonomous AGV / AGC system can be implemented quickly and at low cost. 

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • 3 Benefits of Enclosure Heaters: Keeping Your Equipment Safe and Operational

    3 Benefits of Enclosure Heaters: Keeping Your Equipment Safe and Operational

    Electrical enclosures are critical to safeguarding sensitive IT and electrical components, but they can be vulnerable to extreme temperatures and humidity. This is where enclosure heaters come in—compact, efficient systems designed to maintain a stable internal environment within your enclosures, regardless of external conditions. This article will explore the three primary benefits of enclosure heaters… Read More…

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. This article will explore the various types of relay contacts and their applications in industrial automation. Read More…