Bender: Display. Alert. Control.

November 8, 2018

Alarm indicator, operator and display panels build a bridge between personnel and installed technology. For example, they provide important visual and acoustic information in hospitals and medical locations.

With all the technology the focus of the medical staff must be on caring for the patient. This requires an interface that is as intuitive and as simple to use as possible, as well as an easily accessible installation.

In addition, DIN VDE 0100 710 2012-10 requires that an acoustic and visual alarm system be provided in a suitable location for each IT system. This must be able to be monitored by the medical staff.

Bender meets these requirements with the new COMTRAXX® CP9xx series. It provides an ideal overview of all connected systems at all times, alerts in the event of a fault and ensures convenient system control. Because the system is always in view, you can react to problems at an early stage.

CP9xx – the all-round system

The CP9xx is available in 7″, 15.6″ and 24″ as a touch screen with a glass front and thus meets hospital hygiene requirements. Operation is intuitive via the touch screen.

The buzzer, which is essential for alarm messages, can be set to three volume levels and acknowledged from any panel.

The visualisation is created using an integrated editor. Predefined widgets can visualise information, display switching states and trigger actions. It is just as possible to control surgical lights as to monitor battery-based safety power supply (BSV) systems.

Integrated inputs and outputs (IOs) are expandable. In addition, common interfaces such as KNX, Dali, Modbus etc. are supported.

The device offers the possibility to display alarms and messages in 24 languages.

If the equipment has to be replaced due to conversion or expansion, there is no need to close the operating theatre for a long time. The CP9xx can be prepared outside the operating theatre.

Existing systems with conventional TM panels can be retrofitted very easily in the course of retrofitting measures.

Related Articles

Comprehensive Guide to ABB Circuit Breakers
|

Comprehensive Guide to ABB Circuit Breakers

A circuit breaker is an electrical safety device designed to protect an electrical circuit from damage caused by excess current. It functions as a switch that automatically interrupts the flow of electricity when it detects a fault, such as an overload or a short circuit, thereby preventing damage to the circuit, appliances, or electrical system. Circuit breakers are typically found in electrical distribution panels or breaker boxes, where they monitor the flow of electricity to various circuits in a building or structure. When the current exceeds a certain threshold for a specified period, the circuit breaker trips, cutting off the flow of electricity to that circuit.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…