Major upgrade to ABB Ability System 800xA transforms future project engineering

ABB 800x 400

March 11, 2019

The new release of ABB’s Distributed Control System (DCS) 800xA 6.1 brings significant value to capital projects with more flexible and efficient engineering.

ABB Ability System 800xA 6.1 provides significant innovations to the entire DCS architecture and introduces technologies that shorten timescales for project execution, reduce the impact of late changes and enhance the scalability of the system, bringing substantial value to capital projects. This is achieved by the introduction of new Ethernet I/O solutions, additional High Integrity controllers and a series of new engineering tools such as a new Ethernet I/O Field Kit, an Ethernet I/O Wizard for field commissioning and the possibility to engineer with signals in the Control Builder.

“Our new flexible I/O solutions and engineering workflow will significatly change the way projects are delivered in future,” said Luis Duran, ABB’s System 800xA Product Manager. “The new system can deliver major cost savings on large captial projects. Through greater standardization, tasks can be done in parallel allowing users to make late changes more easily”.

The Select I/O is an Ethernet based single channel I/O that uses xStream engineering to reduce project delivery schedules. Independent teams can work in parallel and then bind together with precision and efficiency later. This reduces the impact of changes during the project, particularly late changes and effectively reduces the commissioning time. Testing efforts and the hardware footprint are considerably reduced as well. Pre-tested, standardized cabinets can be wired directly to field devices and eliminate the needs for physical marshalling cabinets, reducing drawings, equipment and labor. Testing efforts and the hardware footprint are considerably reduced as well.

The new version supports IEC 61850 Ed 2 which means that it is ready for new digital solutions, e.g. digital substations. The electrical integration capabilities in System 800xA offer detailed, real-time information on power consumption down to the individual loads and secure a reliable and steady electrical power supply. The system prevents blackouts and disturbances of operations – while controlling energy costs, enhancing safety and mitigating both environmental and health impacts. Moreover, it’s easier to configure and integrate IEC 61850 networks within System 800xA’s engineering environment providing additional project execution flexibility and the further decoupling of project tasks which in turn reduce design and commissioning time.

System 800xA’s hardware is equally effective for small hybrid systems as it is for large, high availability, integrated automation applications. The modularity of the subsystem results in higher return on assets by providing the flexibility to choose the specific functions necessary to meet actual requirements. The new system also includes support for two new safety controllers; PM857 and PM863. providing even more flexibility for the most mission critical applications. These characteristics in combination with new Select I/O Safety Single Channel Modules expand the existing capabilities and increase the flexibility. The High Integrity controllers offer flexibility of network design as they can be used for integrated but separate safety operations or for fully integrated applications where safety and business critical process control are combined in one controller without sacrificing safety integrity.

 

ABB Ability System 800xA and its extended automation concept has over 11,000 installations world-wide, in practically every industry, automating processes, controlling and monitoring electrical equipment, and reducing risk through high integrity safety systems. It is part of the ABB AbilityTM platform that enables customers to securely integrate and aggregate their data, combine with wider industry data, apply big data and predictive analytics, and generate insights that can help them drive performance and productivity improvements.

Go HERE for more infotmation

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…