Omron Releases New Collaborative Robot That Automates Repetitive Tasks and Enhances Human-Machine Collaboration

Omron colabrobot 400

April 4, 2019

Earlier this year, Omron Automation Americas recently announced the release of an advanced yet intuitive solution for automating repetitive tasks in manufacturing. With built-in vision and a user-friendly, plug-and-play programming interface, the new TM Series Collaborative Robot works seamlessly with humans to enhance productivity and ensure safety.

Designed to enable an innovative manufacturing environment, this highly transportable robot complies with safety requirements for human-robot collaboration specified in ISO 10218-1 and ISO/TS 15066. It can be easily trained to perform almost any repetitive task in any location thanks to a manual teaching function that allows operators to teach the robot with hand-guidance without needing for Software.

  • Programming interface is intuitive and quick to set up. The robot reduces installation and setup times compared with traditional industrial robots thanks to a flowchart-based programming interface and intuitive teaching. No prior robot programming experience is necessary.
  • Integrated on-arm vision system further reduces setup time. The robot comes with built-in vision and integrated lighting for capturing products with a wide viewing angle. Image sensing functions include pattern matching, barcode reading, color identification and more.
  • Compliance with all human-machine collaborative safety standards. The robot ensures safe cooperation between humans and machines and reduces installation time by eliminating the requirement for industrial safety guarding.

The introduction of the new Collaborative Robot is geared towards manufacturers seeking to boost production and reduce employee fatigue by automating repetitive tasks such as machine tending, loading and unloading, assembly, screw driving, gluing, testing or soldering.

Go HERE for more information

Related Articles

Moxa: Go Small with Big Gains

Moxa: Go Small with Big Gains

Moxa has recently unveiled the EDS-2000-EL, with extra small switches to free up valuable space inside your machines and cabinets, allowing you to accomodate more devices for growing network demands. The EDS-2000-EL switches allow you to enhance data flow efficiency simply by flipping the DIP switches to enable QoS and BSP, which reduces the chances of data loss and increased operating costs for your applications.

 

 

 

Mouser: Bourns 1280 Series IEC AC Surge Protective Devices

Mouser: Bourns 1280 Series IEC AC Surge Protective Devices

Bourns 1280 Series IEC AC Surge Protective Devices (SPDs) are designed for power systems, lighting, and current and surge protection. These SPDs feature high reliability and are protected by MOV with advanced thermal disconnector technology. The 1280 series SPDs have pluggable modules for easy replacement and are intended to be installed at the front end of the installation, in the main switchboard, near the sensitive terminals, or in installations without lightning rods (LPS). Bourns 1280 Series SPDs are IEC Class 1 + Class II compliant, meeting IEC/EN 61643-11 standards.

New Parker P8S proximity sensors offer fast and easy mounting

New Parker P8S proximity sensors offer fast and easy mounting

Parker Hannifin has introduced a new family of proximity sensors for use with pneumatic or electric actuators in a wide range of automation and motion control applications. P8S magnetic cylinder sensors enable quick, precise and contactless sensing of a piston‘s position in cylinders. The sensors provide an elegant and cost-effective solution in automated systems and are optimised to be especially easy to mount and incorporate in designs.

 

 

 

The LiquidTrend QMW43 Minimizes Unproductive Downtime

The LiquidTrend QMW43 Minimizes Unproductive Downtime

Cleaning time is downtime, and Cleaning-In-Place (CIP) cycles to eliminate product buildup in a food and beverage operation may be running overly long. Another world first from Endress+Hauser – the Liquitrend QMW43 – provides continuous product buildup data to shorten cleaning cycles to what is necessary to do a thorough job while assuring both operators and consumers of consistent product quality.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…