Emerson Adds Greenlee Phase Sequence and Motor Rotation Indicator to its Test & Measurement Lineup

greenlee phase sequence 400

Apr 15, 2019

Emerson introduces the new Greenlee Phase Sequence and Motor Rotation Indicator (5124). Backed by a manufacturer’s lifetime limited warranty, electrical contractors, HVAC/IR and industrial maintenance technicians can use one device to identify motor rotation direction and clockwise or counterclockwise wiring configuration in a three-phase power source—safeguarding to ensure proper installation. The Phase Sequence and Motor Rotation Indicator is now available.

The new Phase Sequence and Motor Rotation Indicator is rated CAT III 600V and is CE, CETLUS certified. The phase sequence indicators illuminate when three phase power is detected and phase sequence orientation for three-phase power sources and industrial equipment is identified.  A non-contact motor rotation feature determines the rotation of a running single-phase or three-phase motor and illuminates clockwise or counterclockwise motor rotation LED indicators to detect incorrect wiring and help prevent damage to industrial equipment. The new Phase Sequence and Motor Rotation Indicator features tri-colored banana leads, alligator clips, soft carrying case and a durable over molded holster protecting the meter from debris and damage.

“Motor rotation detection is critical when working on industrial equipment such as motors, compressors and generators,” said Katey Earley, Product Specialist for Greenlee, Emerson. “If not done properly, maintenance or repairs could result in expensive, complicated or permanent damage.”

Visit Greenlee.com/MotorPhaseIndicator to review the Phase Sequence and Motor Rotation Indicator’s technical specifications. Contact your local dealer by visiting Greenlee.com/where-to-buy.

For more information, visit www.Emerson.com. 

Related Articles

AutomationDirect: New IronHorse Motor Controls

AutomationDirect: New IronHorse Motor Controls

AutomationDirect has recently added new IronHorse manual motor protectors, contactors, thermal overload relays, and a wide variety of supported accessories to their growing lineup of motor control products.  The IronHorse HMC series contactors are a very economical solution and feature an advanced design with a sealed structure to prevent arc flash exposure; electronic coils are available on select models. These 3-pole contactors have built-in auxiliary contacts and are available in a variety of coil voltages and in seven frame sizes, with ratings from 5 to 300 hp (400A) at 480 VAC.

Seeq Announces the Seeq Solution for Microsoft Sustainability Manager

Seeq Announces the Seeq Solution for Microsoft Sustainability Manager

Seeq Corporation, a provider in manufacturing and industrial internet of things advanced analytics software, has recently announced the Seeq Solution for Microsoft Sustainability Manager.  The solution enables sustainability teams to extend the power of Microsoft Sustainability Manager, a Microsoft Cloud for Sustainability solution, to integrate time series process data preparation, analysis, and continuous improvement, reducing the environmental impact of process industry operations.

Festo Launches New HPPF Diminutive Flat Parallel Gripper for Space-Constrained Applications
|

Festo Launches New HPPF Diminutive Flat Parallel Gripper for Space-Constrained Applications

Thanks to manufacturing innovations achieved on a new production line, Festo’s HPPF diminutive flat parallel gripper not only delivers great force in tight spaces, it’s also extremely well-priced. HPPF ranges from 19 mm to 41 mm among its four sizes: 8, 12, 16, and 20. The stroke ranges from a narrow 8 mm to a wide 80 mm, with gripping forces from 60 N to 377 N. These specs make the new HPPF ideal for space-constrained applications in small parts and electronics assembly.

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…