B&R Automation: Compact and high-performance

May 16, 2019

B&R’s latest addition to its Compact-S series is a compact controller with an integrated switch. With an integrated switch, it enables daisy-chain cabling between network stations.

At a width of only 37.5 mm including the power supply, the X20CP0420 is extremely compact. The controller achieves cycle times down to 4 ms and is equipped with 128 MB RAM and 256 MB internal flash memory. With Ethernet, USB and RS232, the controller offers plenty of communication options. An optional CAN bus interface is also available. With no fans or batteries, the compact controller is also maintenance free.

Sleek automation solution

X20 I/O modules can be connected directly to the controller and line up seamlessly. The entire system saves a large amount of space in the control cabinet. Even with its narrow dimensions, the controller has a built-in power supply for itself and the connected I/O modules. There is no need for a separate power supply module.

For more information, visit HERE.

Related Articles

Beckhoff: Expanded MX-System Portfolio for Control Cabinet-Free Automation

Beckhoff: Expanded MX-System Portfolio for Control Cabinet-Free Automation

If control cabinet-free machines are the question, then the Beckhoff MX-System is the answer. The integration of functional modules onto a backplane system creates a waterproof and dustproof composite of metal enclosures suitable for automating a wide variety of manufacturing/production solutions. These systems often include 48 V motion components, for which the MX-System portfolio now offers four variants of a 48 V / 40 A power supply.

Omron: Sysmac Automation Platform

Omron: Sysmac Automation Platform

Omron’s Sysmac Platform offers synchronous control of all machine devices and advanced functionality such as motion, robotics and database connectivity. This multidisciplinary concept allows you to simplify solution architecture, reduce programming and optimize productivity. Why Sysmac? Omron’s Sysmac Platform makes efficient, flexible and cost-effective manufacturing possible, and features several advantages.

AutomationDirect Adds 22-Gauge Machine Tool Wire

AutomationDirect Adds 22-Gauge Machine Tool Wire

Insulation type MTW machine tool wire is now available in 22-gauge from AutomationDirect. Existing MTW wire sizes are 20 AWG to 10 AWG. The 22 AWG wire offers an 8% smaller diameter with a 3 amp 600-volt rating which is needed for many types of terminal block connections that cannot accept larger wire. MTW wire is designed and approved for use in industrial and commercial equipment.

 

 

 

Mouser: CUI Inc TJ-150 150W Encapsulated AC-DC Power Supplies

Mouser: CUI Inc TJ-150 150W Encapsulated AC-DC Power Supplies

CUI Inc TJ-150 150W Encapsulated AC-DC Power Supplies are housed in a compact, low-profile (19.7mm height) board-mount package. These CUI Inc single-output AC-DC power supply modules output 150W of continuous power and feature a universal 90VAC to 264VAC input voltage range. TJ-150 offers an extended peak power rating and a -40°C to +90°C temperature range, ideal for instrumentation, telecom, and industrial control applications.

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…