Pfannenberg Announces DTS 3000 Series Side Mount Cooling Units

July 16, 2019

Pfannenberg, Inc., a leading global manufacturer of thermal management and signaling technologies, announces the DTS 3000 Series Side Mount Cooling Units, ideal for tough industrial or outdoor applications. Offering simple and time-saving installation, large fin spacing, and a condensate evaporate system that offers maximum energy savings, DTS 3000 Series Side Mount Cooling Units are a good choice for multiple enclosure applications including washdown. The units are available in sizes ranging from 900 to 24,000 Btu/h, for use in applications ranging from small enclosures to high temperature, high ambient environments.

Featuring key internal electronics positioned away from potentially moist and/or caustic air in tough industrial applications, the DTS Series offers wide condenser fin spacing that allows for filterless and maintenance-free operation. The large condenser fin spacing allows for longer maintenance periods, even without an additional Nano coating.

DTS 3000 Series Side Mount Cooling Units’ active condensate management uses a positive temperature coefficient (PTC) heater, eliminating the need for a drain line. Cooling mode starts automatically upon exceeding the required cabinet temperature. The condensate evaporator only activates when necessary for maximum energy savings.

The NEMA Type 4 and 4X 304 stainless steel units repel contaminants in food grade applications and provide for easy washdown. High temperature models can operate in ambient temperatures up to 140° F (60° C), ideal for use near industrial ovens or baking lines. An optional cover protects the fan if used in washdown or in high dust/debris areas.

The stainless steel units have an epoxy coating on all exposed copper tubing to compliment the electrostatically-coated condensers. The fans are conformal coated, backward curve impellers that have a standard life of 55,000+ hours, providing the longest life and best air flow in their class.

A tool-free patented mounting design allows for quick and efficient assembly that considerably reduces installation costs. The units offer the world’s largest possible cut-out compatibility, providing unit replacement with the least possible installation work, thanks to intelligent mounting systems.

Visit https://www.pfannenbergusa.com/thermal-management/cooling-units/dts-side-mount/ to learn more.

Related Articles

PB-43-Mennekes-ThreeMototDisconnects-400.jpg

Three Motor Disconnects Featuring Industry-Standard Mounting Options

Need to upgrade motor disconnects in your facility? We have three great options for you that use industry-standard mounting patterns, making each option a true drop-in replacement. These units include sloped- and curved-top designs to facilitate liquid runoff in washdown settings to enhance plant sanitation while offering superior functionality and durability.

 

 

 

Automating Warehouse and Fulfillment Centers with Cobots and 3D Vision from FANUC
| |

Automating Warehouse and Fulfillment Centers with Cobots and 3D Vision from FANUC

FANUC’s newest autonomous order fulfillment, bin transfer and shelving system helps supply chain businesses overcome the labour shortage with cobots. At ProMat 2023 in Chicago this past March, robots dominated the show floor and took shape in many different forms, from mobile to articulated arms to even bi-pedals. However, two clear trends emerged from the…

HARTING: Han 1A – Versatile lightweight

HARTING: Han 1A – Versatile lightweight

The industrial sector is using ever smaller machines at the same time as the modularisation of plants and systems continues to progress. What is needed are compact, modular and robust connections for connecting small loads. HARTING is responding to this trend with the Han 1A. The rectangular connector has a whole host of advantages: the connector is suitable for the transmission of data, signals and power, and provides an ideal solution for e.g. control systems, smaller drives and switch cabinet installations.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…