Continuous Flexing Control Cable and Profibus-DP Cable from AutomationDirect

September 26, 2019

AutomationDirect now offers continuous flexing control cables and continuous flexing Profibus-DP cables that are designed to be exposed to constant flexing during operation and to withstand millions of flex cycles. These cables are available cut-to-length in one-foot increments with a 20-foot minimum length.

igus CF130US and CF140US series tray rated control cables are specifically designed, tested, and manufactured for use in both continuous flexing and fixed tray applications. Starting at $1.16 per foot, the tray rated cable is available shielded or unshielded in wire sizes from 18 to 12 AWG with 4 to 25 conductors including ground. The pressure-extruded PVC outer jacket is sunlight, oil and flame resistant.

CFBUS series continuous flexing Profibus cable from igus is designed for constantly moving applications. Available in 24 AWG twisted pair, the individual conductors are bare copper and stranded for flexing applications. Conductor insulation is a high-quality red and green TPE mixture. The cable’s outer jacket is a pressure extruded purple PVC mixture that is resistant to sunlight, oil penetration, and is flame retardant. Profibus cable starts at $1.46 / ft.

Learn more by visiting: www.automationdirect.com/multi-conductor-cable 

Related Articles

Phoenix Contact

Phoenix Contact: New AC Charging Controller with Extended Functions

 

Along with AC charging in accordance with IEC-61851-1, the controller includes a DC residual current monitoring system. The controller is automatically reset when residual currents arise, increasing the availability of the charging station. An automatic vehicle connector unlocking system is also included, which ensures that the connector can be removed without any problems in the event of a voltage failure.

 

 

PBUS-26-Omron-K7GEFourPros-400.jpg

Four Ways That Omron’s New K7GE Helps Minimize Downtime and Improve Productivity

Many manufacturers use time-consuming and potentially dangerous manual processes to inspect servo motors for insulation issues. If this sounds like your company, it might be time to switch over to an automated, remote-based servo motor condition monitoring solution that works around the clock.

 

 

 

AutomationDirect: WAGO ECO2 Series Power Supplies

AutomationDirect: WAGO ECO2 Series Power Supplies

AutomationDirect has recently added WAGO Eco2 series power supplies that offer performance and value, featuring high efficiency and a compact, space-saving design, making them ideal for space-limited applications. These economical power supplies provide reliable performance and long service life for a variety of applications such as industrial automation, building management systems, machine control, and robotics.

Endress+Hauser: Proline Promag H 300/500 Series Electromagnetic Flowmeter Enhancement

Endress+Hauser: Proline Promag H 300/500 Series Electromagnetic Flowmeter Enhancement

Endress+Hauser is adding more innovations to its feature-rich Proline Promag H 300/500 series electromagnetic flowmeters for hygienic operations, endowing them with more capability to assure process integrity and maximize production uptime. Promag H is the go-to series for the food and beverage and life sciences sectors. Promag H provides temperature, flow and conductivity measurement in one device. It’s a best seller for that versatility and for its rugged design, which enables it to resist the rigours of Cleaning In Place (CIP) cycles like elevated temperatures of aggressive chemicals, and strong vibration from the turbulent flows required for thorough cleaning.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…