Yaskawa Motoman Collaborative Robots Offer Flexible and Affordable Task Automation

October 3, 2019

Featuring power and force limiting technology, Yaskawa Motoman’s HC10 and HC10DT robots work safely with, or in close proximity to humans by stopping the robot in the event of contact with an operator. Dual channel torque sensors in all joints constantly monitor force to quickly react to contact. The HC10 and HC10DT are six-axis collaborative models designed to eliminate operator pinch points while through-arm utilities hide cabling and increase safety by reducing the risks of snagging or interference with other equipment.

Ideal for novice robot programmers, both models offer intuitive robot programming with a quick and easy learning curve. Utilizing the Smart Pendant, the HC10 can be hand-guided for easy positioning of the robot. The HC10DT (direct teach) offers intuitive robot path programming through the use of three easy-to-use programming buttons.

Precision hand-guiding for teaching new program paths allows the HC10 and HC10DT to be quickly deployed or redeployed on demand, decreasing system downtime and increasing ROI. Whether operating at full speed on industrial mode or collaborative speed on PFL mode, cycle times are optimized based upon risk assessments and process requirements. 

Both models offer a 10-kg payload and 1,200 mm reach and can perform a broad range of material handling, machine tending or light assembly tasks. Function-specific tooling and accessories are available from various Yaskawa partners.

The HC10 collaborative robot leverages Yaskawa’s long history of building robots that are durable and reliable, resulting in minimal downtime.

The HC10 robot is controlled by Yaskawa’s high-performance YRC1000 controller that is built to a global standard and does not require a transformer for input voltages ranging from 380VAC to 480VAC. The YRC1000 is compact (598 W x 490 H x 427 D mm), resulting in reduced space requirements. The HC10DT is controlled by the ultra-compact YRC1000micro controller. Its small footprint (425 W x 125 H x 280 D mm) and lightweight cabinet are ideal for factories with high-density layouts, where stacking of controllers may be required.

For more information, visit www.motoman.com.

Related Articles

AutomationDirect: LS Electric 2-axis and Relay Output XGB PLC Models

AutomationDirect: LS Electric 2-axis and Relay Output XGB PLC Models

AutomationDirect has released three new LS Electric XGB PLC models that provide advanced control at an even lower cost. Two 16-point 2-axis motion PLC units and a 14-point relay output model are now available. The 2-axis PLC versions support pulse/direction control from the embedded I/O, featuring 4 high-speed inputs and 2 high-speed outputs, as well as EtherCAT motion using EtherCAT expansion modules. The new relay output PLC provides 8 inputs, 4 offering high-speed capability, and 6 relay outputs supporting up to 2A per point. This PLC version can also support EtherCAT motion using the optional EtherCAT expansion modules.

DCS Allied Electronics Offers Schneider Electrics New ATS480 Series Soft Starter 1 400x275

Allied Electronics & Automation: Schneider Electric’s New Altivar ATS480 Soft Starters for Industrial Automation Applications

Allied Electronics & Automation is now stocking Schneider Electric’s new Altivar ATS480 soft starters, which are designed to support widespread digitization efforts in the industrial automation industry.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…