Eaton Electronic Overload Relays up to 175A added by AutomationDirect

November 1, 2019

Eaton XT series self-powered electronic overload relays are self-contained units available at up to 175A. Eaton XT electronic overload relays are the most compact, high-featured, economical products in class, offering additional trip classes, universal connections to any contactor, and a wide amperage range. Accessory 24VDC and 120 VAC remote reset modules provide remote overload reset capability.

Eaton XT series electronic overloads have a broad full-load-amperage (FLA) range (0.33-175A), selectable trip classes (10A, 10, 20, 30), and can be separately mounted to NEMA, IEC and DP contactors. Motor protection includes thermal overload, phase loss, selectable on/off phase imbalance and on/off ground fault (on select models).

Priced from $67.00, Eaton XT series electronic overloads are UL, CSA and CE approved.

Learn more by visiting: www.automationdirect.com/eaton-overloads.

Related Articles

PNOZmulti Configurator – the Original Tool for Your Safety Circuit Configuration

PNOZmulti Configurator – the Original Tool for Your Safety Circuit Configuration

Software Version 10.11 enables you to use the real-time Ethernet SafetyNET p RTFL to configure safe data exchange between PNOZmulti 2 base units (PNOZ m B0 / B1) and the safe motion solution PMCprotego DS. PMCprotego DS is composed of the servo amplifier PMCprotego D and the safety card PMCprotego S3. 32-bit data is exchanged via RTFL, enabling short reaction times for your application.

 

 

 

DCS Allied Electronics Offers Schneider Electrics New ATS480 Series Soft Starter 1 400x275

Allied Electronics & Automation: Schneider Electric’s New Altivar ATS480 Soft Starters for Industrial Automation Applications

Allied Electronics & Automation is now stocking Schneider Electric’s new Altivar ATS480 soft starters, which are designed to support widespread digitization efforts in the industrial automation industry.

 

 

 

AcuAmp Current/Voltage Transducers and Switches Line Extension from AutomationDirect

AcuAmp Current/Voltage Transducers and Switches Line Extension from AutomationDirect

More transducers and switches have been added to the AutomationDirect sensors lineup. ATCH series adaptive true RMS current transducers ($169.00) are designed to monitor electric heat zero-crossing burst fired SCR controllers. These transducers provide faster response than temperature sensors and are a simplified method to monitor pulsed waveforms and are ideal for electrical heater applications.

 

 

 

PBUS-27-Allied-MoxaTeamUp-400.jpg

Allied Electronics & Automation and Moxa Team Up to Help Engineers Overcome Industrial Networking Challenges

Engineers face many obstacles when connecting older equipment to local networks or the cloud as part of modernization and overhaul projects. When these replacements, expansions, and upgrades occur, there are often space constraints for installing products in existing cabinets or machines.

 

 

 

Changing Scene

  • Strategic Partnership Launched: SICK and Endress+Hauser Join Forces in Process Automation

    Strategic Partnership Launched: SICK and Endress+Hauser Join Forces in Process Automation

    SICK and Endress+Hauser are bringing their strategic partnership in process automation to life: SICK’s advanced gas analysis and flow measurement technology is now an integral part of Endress+Hauser’s comprehensive instrumentation portfolio. The collaboration is designed to offer customers in the process industry enhanced support in increasing plant efficiency, protecting the environment and reducing carbon footprint. Read More…

  • ABB Invests in Generative AI Energy Manager Startup Edgecom

    ABB Invests in Generative AI Energy Manager Startup Edgecom

    ABB is investing in a strategic partnership with Edgecom Energy, the Toronto-based energy management startup. The company’s unique energy management platform uses artificial intelligence to help industrial and commercial users manage and reduce peaks in their power demand. It is the first in the market to use a generative AI copilot to optimize the user… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Overcoming Automation Challenges with Sysmac: Lessons from Real-World Applications

    Overcoming Automation Challenges with Sysmac: Lessons from Real-World Applications

    Modern manufacturing is riddled with challenges that demand innovative, reliable, and flexible solutions. From bridging knowledge gaps to reducing downtime, these hurdles can hold back productivity and profitability. The Sysmac automation platform from Omron addresses these pain points head-on, offering a comprehensive suite of components and features designed to streamline processes and enhance operational efficiency. Read More…

  • How Factory Automation Supports the Medical Device Industry

    How Factory Automation Supports the Medical Device Industry

    The healthcare industry is among the most highly advanced manufacturing fields in the world, with tight controls and restrictions governing the development and production of medical devices at every stage. At the same time, researchers and developers in the healthcare industry benefit from manufacturing solutions that are flexible, reliable, and innovative. The tension in the… Read More…