Balluff Delivers More Intrinsically Safe Sensors from a Single Source

February 14, 2020

Balluff’s newly expanded inductive portfolio delivers a wide range of intrinsically safe sensors for use in explosion protected areas. Each sensor is approved for all explosive zones and offers reliable detection and position measurement when hazardous materials, such as explosive gas, dust, or flammable liquids, are present.

Designed specifically to meet the demands of applications in hazardous atmospheres, each sensor works on such a low current and voltage that it cannot ignite flammable material present in explosive zones. The sensors, combined with Balluff isolating amplifiers, form an intrinsically safe unit. Compact versions are also available that do not require an additional amplifier while still providing the necessary safety.

“This portfolio offers reliable detection and position in explosion protected areas, which is necessary for manufacturers of oil or gas, or any applications where there is fuel or chemicals. With these new products, we can better serve our customers as they allow us to tackle applications that we couldn’t previously,” said After-Sales Technical Support Engineer Shawn Day.

Most important features:

  • –   Approved for ATEX zones 0, 1, and 2, and zones 20, 21, and 22
  • –   Wide range of intrinsically safe sensors from a single source
  • –   M12, M18, and M30 form factors
  • –   Fast installation and replacement using standardized connections

Learn more at: www.balluff.com.

Related Articles

Festo’s Bionic Flower – A Bionically Inspired Robot Teaching Aid

Festo’s Bionic Flower – A Bionically Inspired Robot Teaching Aid

Festo is renowned for its bionic creatures – robotic fauna that fly, crawl, scamper or swim and point the way to possible commercial developments that mimic actions in nature. Now, Festo Didactic, the leader in basic and advanced training solutions for industry, has unveiled the Bionic Flower, a construction kit for today’s young STEM students inspired by the world of flora.

 

 

 

Security Cells Protect Against Cyber Threats

Security Cells Protect Against Cyber Threats

Connectivity between production and automation systems in process manufacturing and the Internet is constantly increasing. In order to fully protect manufacturing systems against cyberattack, B&R has further enhanced the user management features of the APROL process control system. Distributed, autonomous security cells provide simple yet efficient protection for systems against malicious software and attacks from hackers.

 

 

 

PB-43-Mouser-Lumotast16-400.jpg

RAFI: Lumotast 16

Space for pushbuttons and switches is limited on many devices – especially when they must be both handy and user-friendly. This has previously led to compromises in this area – in terms of the design or quality. That’s why RAFI developed the LUMOTAST 16.

 

 

 

VLT Automation Drives

Danfoss VLT Automation Drives

 

The VLT AutomationDrive is designed for variable speed control of all asynchronous motors and permanent magnet motors. It comes in a standard version (FC 301) and an advanced high dynamic version (FC 302) with additional functionalities. It helps save energy, increase flexibility, reduce costs related to spare parts and servicing, and optimize process control on any industrial machine or production line.

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…