Phoenix Contact: Mobile Thermal Transfer Printer for Creating Markings Directly on Site

June 8, 2020

The new handy THERMOMARK GO thermal transfer printer from Phoenix Contact allows you to create markings flexibly, anywhere, and at any time.

In combination with the MARKING system app, you can use the label printer to create industrial identification labels directly on-site. You can design markings easily in the app on a smart device. You can also operate all of the printer functions from there.

The printer is controlled via wireless interfaces to the smart device. The compatible interfaces include Bluetooth, NFC, and USB connection. The app guides you clearly and intuitively through the entire marking process.

You can use the thermal transfer printer for a broad range of applications, both in indoor and outdoor installations. Pre-punched labels and continuous materials ensure greater flexibility. Materials are available in standardized cassette systems. The maximum print width is 24 mm, the print resolution is 203 dpi. The printer, weighing just 600 grams, uses thermal transfer printing technology.

Source

Related Articles

Siemens Launches New SIMATIC Workstation, a Breakthrough in Automation Technology

Siemens Launches New SIMATIC Workstation, a Breakthrough in Automation Technology

Siemens has announced a breakthrough in the longstanding challenge of closely managing numerous hardware control points throughout the factory. The “SIMATIC Automation Workstation,” allows manufacturers to replace a hardware PLC, a conventional HMI and an edge device with a single, software-based workstation. This ushers in Internet Technology (IT) workflows to Operational Technology (OT) environments.

Kollmorgen Expands AKD2G Versatility With the Launch of New Synchronized Communication Protocols

Kollmorgen Expands AKD2G Versatility With the Launch of New Synchronized Communication Protocols

Kollmorgen has recently announced the latest update to its AKD2G servo drive. With the introduction of these new features, Kollmorgen has broadened its offerings to additionally support PROFINET IRT and Ethernet/IP with CIP Sync alongside CANopen, EtherCAT, and FSoE time-synchronized communication protocols. Each protocol is rigorously tested with a variety of motion controllers and certified by industry standards organizations. The AKD2G servo drive update allows for synchronized motion between multiple drives using a wide variety of control architectures.

Seeq Announces the Seeq Solution for Microsoft Sustainability Manager

Seeq Announces the Seeq Solution for Microsoft Sustainability Manager

Seeq Corporation, a provider in manufacturing and industrial internet of things advanced analytics software, has recently announced the Seeq Solution for Microsoft Sustainability Manager.  The solution enables sustainability teams to extend the power of Microsoft Sustainability Manager, a Microsoft Cloud for Sustainability solution, to integrate time series process data preparation, analysis, and continuous improvement, reducing the environmental impact of process industry operations.

Choosing the Right Omron Industrial Camera
|

Choosing the Right Omron Industrial Camera

Omron offers a range of industrial machine vision cameras renowned for their precision and reliability. These cameras are crucial in manufacturing and quality control. This article covers the features, applications, and selection guide for Omron industrial cameras. Explore the versatile range of Omron industrial cameras including area scan, line scan, and SWIR series. Learn how to select the right industrial camera for your needs, considering vision analysis, connectivity, and application.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…