DURApulse GS20 Series High Performance AC Drives from AutomationDirect

durapulse gs20 ac drives 5x7

July 23, 2020

The DURApulse GS20 Series of next generation high-performance vfd drives provides many standard and advanced functions in a compact reduced size unit. The new GS20X series of AC drives is IP66/NEMA 4X rated for operation in harsh environments.

The drives include many of the same standard features as the family of drives including dynamic braking, PID, removable keypad, and RS-485 Modbus communication. The GS20 drive expands the DURApulse family by adding single-phase input capability (ALL 230VAC drives can be supplied single-phase), a built-in PLC, and optional EtherNet/IP and ModbusTCP communication card. An available GS2 mode duplicates exact parameter configuration of GS2 series mini AC drives.

GS20 drives are available from 1/4 to 30 hp in single-phase 120VAC input, single-phase/three-phase 230VAC input, and three-phase 460VAC and 575VAC input. GS20X NEMA 4X drives are available up to 10hp.

Several speed control modes are available including standard V/Hz control with pulse input feedback, sensorless vector control (SVC) for induction motors (IM) and permanent Motors (PM), and precise Field Oriented Vector control (FOC) for maximum open loop speed regulation control.

AutomationDirect DURApulse GS20(X) drives start at $135.00 and have a two-year warranty.

Learn more by visiting: www.automationdirect.com/durapulse

Related Articles

NTC

Littelfuse: Negative Temperature Coefficient (NTC) Thermistors 

Littelfuse has recently developed a negative temperature coefficient (NTC) thermistor series to detect and measure heat or thermal energy and convert it into an electrical signal to monitor applications. The new, in-stock supply, with an easy-to-use temperature sensor part selector, offers fast delivery to meet customer needs. These thermistors are used in a variety of applications including HVAC, automation, battery management systems, automotive and medical equipment, appliances, and electronics.

FLIR: CM276 Professional Clamp Meter and Thermal Imaging Camera for Electrical System Test and Measurement

FLIR: CM276 Professional Clamp Meter and Thermal Imaging Camera for Electrical System Test and Measurement

FLIR has recently released the FLIR CM276 professional clamp meter with infrared imaging, a visual camera, and solar photovoltaic (PV) direct current (DC) built for electrical test and measurement. The CM276 empowers electrical professionals to troubleshoot electrical system components with Infrared Guided Measurement (IGM) and radiometric multispectral dynamic imaging (MSX), which overlays visible camera details onto the thermal image, helping users safely execute inspections and identify hazards before contact is made. 

PBSI 3 TE Connectivity SOLARLOK PV Edge 400

TE Connectivity introduces SOLARLOK PV Edge junction box to improve installation and efficiency of glass-to-glass photovoltaic panels

TE Connectivity (TE) has annouced the new SOLARLOK PV Edge decentralized junction box, which can be attached to glass-to-glass photovoltaic panels without drilling holes. The new junction box aims to reduce installation costs, raise energy outputs from the panels and improve reliability.

 

 

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…