Greenheck Three-Phase Vari-Green Motors

GreenheckThreePhase

October 14, 2020

Greenheck has added three-phase motors to its line of energy efficient Vari-Green electronically commutated (EC) motors. The new three-phase motors accept 208-230V and 460V power supply and are available in sizes ranging from 1 to 10 hp. Typical turndown is factory-set at 75% and speed can be controlled via an onboard dial or a 0-10 VDC control signal. Low maintenance Vari-Green motors run quieter and cooler and offer higher efficiencies compared to standard motors; the three-phase Vari-Green motor operates at IE5 efficiency levels. The three-phase motor is compatible with all Vari-Green controls and other controls such as a building automation system and has an auxiliary contact for motor status or damper actuation. The three-phase Vari-Green motor can be ordered with select sizes of Greenheck models SQ inline fans, AER axial fans and models G and CUE power roof ventilators.

 

Features:

  • Accept 208-230V and 460V power supply
  • Available in sizes ranging from 1 to 10 hp
  • Typical turndown is factory-set at 75%
  • Speed can be controlled via an onboard dial or a 0-10 VDC control signal
  • Available with select sizes of Greenheck models SQ inline fans, AER axial fans and G and CUE power roof ventilators

Source

Related Articles

Mouser: CUI Inc VGS-500B AC-DC Power Supplies

Mouser: CUI Inc VGS-500B AC-DC Power Supplies

CUI Inc VGS-500B AC-DC Power Supplies offer 500W continuous output power and an operating altitude of up to 5000m. These power supplies feature parallel output operation, remote output voltage sensing, and active Power Factor Correction (PFC). The VGS-500B AC-DC power supplies provide short-circuit, over-current, over-voltage, and over-temperature protections. These power supplies feature 65kHz switching frequency, 0.5W no load power consumption, and -40°C to 85°C operating temperature range. The VGS-500B AC-DC power supplies are ideal for telecom, instrumentation, and industrial control applications.

Festo’s Bionic Mobile Assistant – a Robotic Helping Hand Like None Other

Festo’s Bionic Mobile Assistant – a Robotic Helping Hand Like None Other

Advancing gripping technology is essential for promoting new uses for automated systems. Festo’s Bionic Mobile Assistant robotic helper, one of the latest reveals from the company’s Bionic Learning Network, represents a significant advance in mimicking that most amazing gripping tool of nature – the human hand.

 

 

 

New Parker Subsea Small-Bore Valves Deliver Leak-Free, Long-Term Performance in Oil and Gas Exploration and Production

New Parker Subsea Small-Bore Valves Deliver Leak-Free, Long-Term Performance in Oil and Gas Exploration and Production

Parker Hannifin has recently launched a new range of small-bore subsea ball valves and subsea needle valves for leak-free and reliable, long-term performance in subsea applications up to 10,000 PSI (689 bar) and depths down to 3,050 m (10,000 ft).

 

 

 

Reliable Controls: RC-FLEXone, an Innovative New Building Controller Packed With Flexibility and Processing Power

Reliable Controls: RC-FLEXone, an Innovative New Building Controller Packed With Flexibility and Processing Power

Reliable Controls has recently launched the RC-FLEXone, a flexible BACnet Building Controller designed to suit a wide range of equipment and room control applications and to evolve with the needs of the built environment. “The RC-FLEXone isn’t just a controller,” says Rudolf Erasmus, Hardware Manager at Reliable Controls. “It’s a tool that will inspire confidence in buildings around the world. With its advanced features and adaptability, the RC-FLEXone empowers our Authorized Dealers to deliver solutions that are truly better by design.”

AutomationDirect: Socomec Modular Midget & CC Fuse Holders

AutomationDirect: Socomec Modular Midget & CC Fuse Holders

AutomationDirect has added new Socomec modular Midget and CC Class fuse holders to aid with the completion of overcurrent protection circuits in industrial systems. These finger-safe, DIN-rail mounted fuse holders are available in 1-, 2-, or 3-pole versions with a blown fuse LED indicator on select models. They are offered with up to a 30A capacity and a 200kA interrupt rating for CC Class fuse holders, and a 100kA interrupt rating for Midget Class fuse holders.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…