Converter Cables Create Possibilities for Mobile Equipment Makers

October 26, 2020

Balluff’s new double-ended converter cables with automotive style connectors create new options for manufacturers in the heavy equipment industry.

By pairing an M12 to Deutsch DT or AMP Superseal connectors with several common pin outs, the converter cables give manufacturers the option of using sensors without pre-installed automotive style connectors. They can, instead, select the standard sensor that best meets their application requirements to use with a converter cable.

“Selecting the proper sensor for off-highway mobile equipment is a critical design step for safe and efficient operation. Off-highway equipment manufacturers require environmentally sealed automotive style connectors to meet their unique needs, but most sensor offerings come only equipped with an M12 threaded connector,” said Rob Crumley, Balluff industry account manager. “These converter cables eliminate that issue and make it possible for manufacturers to choose the best sensor for the application based on its capabilities, not only its connector.”

The converter cables are rated for 5 million flex cycles and come with IP67, IP68 and IP69K protection ratings. The cables utilize PUR jackets, making them resistant to most oils, gasoline, degreaser solvents, and other common fluids found on mobile equipment. PUR jackets also greatly improve low temperature flexibility, resistance to the environment, and oxidation protection.

Sensors used in mobile equipment must have the right properties for the job at hand without compromise. Balluff’s converter cables make it easier to find the best sensor for the application.

Key features:

  •    –   One sensor can be used in several applications by using cables of various lengths, pin-outs, connector styles.
  •    –   No more design compromises! Choose the best sensor for the application.
  •    –   A damaged cable is simple to replace. No need to remove the sensor, re-calibrate air gaps, readjust sensitivities, or re-align mounting brackets. 
  •    –   Other automotive style connectors available upon request. 

Learn more at: www.balluff.com.

Related Articles

Phoenix Contact: New 3-Phase Version of Trio Power Power Supply

Phoenix Contact: New 3-Phase Version of Trio Power Power Supply

The Trio Power power supply with integrated electronic circuit breaker from Phoenix Contact is now also available as a 3-phase version. The third generation of Trio Power power supplies continues to set the new standard in machine building. The power supplies are compact, robust, reliable, and impress with their easy handling. The new three-phase power supplies with integrated multi-channel device protection feature a space-saving design and are now also available up to a 40 A nominal output current.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…