New Cylinder Becomes Seventh Member of Festo’s Simplified Motion Series

October 28, 2020

And then there were seven. The EPCE electric cylinder has become the seventh member of Festo’s Simplified Motion Series (SMS), a family of electric actuators that mimics the simplicity of pneumatics in performing simple point-to-point movements or positioning tasks. Each has an integrated servo drive, controller and electronics, and two on-board control options as standard: Digital I/O and IO-Link.

The EPCE cylinder unit is ideal for fast movement in sorting, distribution and testing applications. It converts the rotary motion of the mounted motor into the linear motion of a piston rod or rods via an internal toothed belt drive. The EPCE toothed belt technology provides maximum dynamic response and minimal positioning times. Its minimal zero stroke and extremely compact design make it an ideal choice for applications in small spaces.

There are numerous variants available, based on the location and number of piston rod(s), left or right, front or rear, etc. (Units with 1-4 piston rods are available, and there are through-piston rod as well as dual opposite-direction piston rod variants as well.)

The EPCE has all the same easy-to-set-up virtues as the other six SMS actuators to appeal to users who want an economical electrical alternative to pneumatic cylinders that’s simpler than most electric automation solutions to activate. Commissioning is fast and easy; all parameters are set manually on board the device. No software or special expertise is required to get the unit up and running. Extended functions are possible with IO-Link.

For more information, visit www.festo.com.

 

 

 

Related Articles

Littelfuse Introduces New SPD2 Type 2 Surge Protection Device (SPD) Product Line

Littelfuse Introduces New SPD2 Type 2 Surge Protection Device (SPD) Product Line

Littelfuse, Inc., a global manufacturer of leading technologies in circuit protection, power control and sensing, today announced the launch of its SPD2 series of Type 2 surge protection devices. Transient overvoltage, or power surges, can damage components and drive added costs to repair or replace as well as create unplanned downtime.

 

 

 

TE Connectivity: 369 Shielded Connector

TE Connectivity: 369 Shielded Connector

TE Connectivity (TE), a world leader in connectivity and sensors, is extending its time-tested 369 connector series with the introduction of the new 369 shielded rectangular connectors for environments that demand ambient EMI noise protection. These connectors incorporate the benefits of the 369 series, which is qualified for use in a wide range of commercial aerospace applications, with EMI shielding that opens up new application possibilities.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…