Littelfuse Launches DC Disconnect Switch Product Line

November 11, 2020

Littelfuse, Inc. recently announced the introduction of its DC Disconnect Switch product line. The Littelfuse LS6 (available in 1000 and 500 V) and the LS6R (available in 1500 V) series are energy-efficient, compact disconnect switches that quickly break or resume the flow of current safely. Offered in both 250 and 400 amperage ratings, these switches prevent shock hazards when isolating circuits or repairing systems. 

“The LS6 and LS6R DC disconnect switches have a streamlined design to eliminate the need for external bridging links or jumpers to lower heat dissipation,” said Craig Greeson, Littelfuse Industrial Business Unit Product Manager. “This increases energy efficiency as well as decreases installation and maintenance time for applications in photovoltaic and energy storage systems, oil and gas, railway, and uninterrupted power systems.”

The LS6R offers a patented operation system that minimizes damage caused by arcs upon disconnection to increase product reliability and longevity.

Key benefits of both the LS6 and LS6R series of DC disconnect switches include:

  •    –   a high-level disconnection insulation to provide a barrier to stop conduction when switch is in off position for added safety
  •    –   self-cleaning blade contacts that eliminate performance degradation (from increased electrical resistance over time) to ensure consistent behavior across the product’s lifespan
  •    –   an internally-located “sandwich-type” 2-contact symmetrical design to mitigate the electromagnetic force of repulsion to offer enhanced functionality in short-circuit conditions
  •    –   Meeting UL 98B, UL 94, and IEC 60947-3 standards

For more information, visit www.Littelfuse.com.

Related Articles

New Bender ISOMETER Reduces the Cost and Risk of Legacy System Upgrades in Oil and Gas Platforms

New Bender ISOMETER Reduces the Cost and Risk of Legacy System Upgrades in Oil and Gas Platforms

Cost effective upgrades to existing oil and gas infrastructure are a key requirement for operators, extending the life of offshore plants. Globally, there are thousands of Bender IRDH1065 line insulation monitors (LIMs) installed in oil and gas fields on ungrounded electrical systems.

 

 

 

XP Power: JMR03/10/20 Series Ultra-Compact, Medically Approved, 4:1 Input DC-DC Converters for BF and CF Rated Applications

XP Power: JMR03/10/20 Series Ultra-Compact, Medically Approved, 4:1 Input DC-DC Converters for BF and CF Rated Applications

XP Power has recently introduces the JMR03/10/20 series of 3W, 10W, and 20W ultra-compact, medically approved DC-DC converters that offer a wide 4:1 input ratio, making them suitable for various input requirements. These devices provide 2 x MOPP (Means of Patient Protection) with just 2µA leakage current, ensuring easy integration into both BF (Body Floating) and CF (Cardiac Floating) rated healthcare applications. One of the standout features of these devices is their low no-load input idle current (down to 4mA, depending on the model), which increases efficiency, reduces waste heat, and extends the runtime of battery-powered portable equipment.

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…