Acromag Releases the Smallest Mezzanine Module with the Power of a Zynq UltraScale+ MPSoC for I/O Processing and Programmable Logic

December 2, 2020

Acromag’s new APZU series expands their offering of mini PCIe-based AcroPack modules with a programmable I/O solution featuring the Xilinx Zynq UltraScale+ multiprocessor system-on-a-chip (MPSoC). Three models are available offering a choice of digital I/O interfaces with 28 TTL, 20 TTL and 3 RS422/485, or 14 LVDS signals. These mezzanine modules mount on a variety of AcroPack carrier cards for PCIe, VPX, and other platforms allowing developers to mix and match I/O combinations on a single board for embedded applications running on Linux, Windows, or VxWorks operating systems.

The APZU’s Zynq 3CG MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Two dual-core ARM Cortex CPUs (A53 application processor and R5 real-time processor) deliver high-performance computation capability. 154k logic cells provide plenty of FPGA processing blocks for hardware acceleration and compute-intensive tasks. Additional resources include large on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces. Gigabit Ethernet, USB 2.0, and USB-UART interfaces are supported.

AcroPack modules are only 30mm x 70mm. They use a standard mini PCIe edge connector but add a down-facing 100-pin connector which internally routes I/O signals through the carrier card to secure field connectors, thus eliminating loose cables and increasing reliability.

“Designers can increase overall system performance by leveraging the tightly-coupled CPU and FPGA computing engines for different signal processing tasks in a very small and cost-effective form factor.” stated Robert Greenfield, Acromag’s Business Development Manager.

Designed for defense and aerospace systems, these AcroPacks are ideal for adaptive filtering, protocol conversion, simulation, HIL test, motor control, image processing, and sensor fusion applications. The COTS modules can be used in PCIe servers, VPX or CompactPCI Serial chassis, and small form factor embedded computers.

For more information, visit www.acromag.com.

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…