HARTING: Faster Wall-Mounting For Connectors

PBUS-26-HARTING-HanHPR16B-400.jpg

April 14, 2021

The metal housings in the Han EMV and Han HPR series are now also available in versions that enable contact inserts to be mounted from the rear — an option that simplifies the placement of interfaces on switch cabinet walls and increases the installation speed and thus lowers costs in the long term.

HARTING has produced other connector types that feature a rear-fit mounting option. The Han-Eco A and B and the Han B and Han M series came out with this installation option (“Rear-Fit”) over the past two years. Now, the option is also available for the first time for the Han EMV and Han HPR series.

Rear-fit mounting means that contact inserts can be installed in the housing from the rear, which is particularly important for installation in cabinets in combination with prefabricated cable assemblies. Assembling both products is further accelerated by using a mounting frame — or the modules can be inserted directly into the housing. All Han series that feature the Rear-Fit option make it easier to install contact inserts and cut installation times.

The “Rear-Fit” housings are also interoperable with earlier versions that cannot be equipped from the rear, which translates into cost-effective, step-by-step introduction of the new housings into production.

For more information, visit www.HARTING.com/DE/en-gb/news/press-release.

Related Articles

Automating Warehouse and Fulfillment Centers with Cobots and 3D Vision from FANUC
| |

Automating Warehouse and Fulfillment Centers with Cobots and 3D Vision from FANUC

FANUC’s newest autonomous order fulfillment, bin transfer and shelving system helps supply chain businesses overcome the labour shortage with cobots. At ProMat 2023 in Chicago this past March, robots dominated the show floor and took shape in many different forms, from mobile to articulated arms to even bi-pedals. However, two clear trends emerged from the…

AutomationDirect: New ProSense T30R Series Timer Relays

AutomationDirect: New ProSense T30R Series Timer Relays

AutomationDirect has added new ProSense T30R series rugged timer relays featuring a high 30A SPDT output contact that controls loads without requiring a separate contactor. These new single-function timer relays are available in on-delay, off-delay, fleeting, and cyclic mode timing options and offer an easy-to-use rotary switch adjustment with timing ranges up to 10 hours. The new timer relays are encapsulated for resistance to harsh environments and utilize a microprocessor-based design for superior accuracy and repeatability.

Rittal: New Blue e+ S Cooling Units Enhances Efficiency and Sustainability
|

Rittal: New Blue e+ S Cooling Units Enhances Efficiency and Sustainability

The push towards sustainable manufacturing is driving the need for efficient enclosure cooling units, especially in industries like automotive where consistent cooling is crucial. The challenge lies in maintaining necessary cooling outputs while adhering to eco-friendly standards. Rittal’s Blue e+ line has set a benchmark in industrial cooling. The new Blue e+ S takes it further with precise cooling, a smaller footprint, and greater energy savings.

New Parker Subsea Small-Bore Valves Deliver Leak-Free, Long-Term Performance in Oil and Gas Exploration and Production

New Parker Subsea Small-Bore Valves Deliver Leak-Free, Long-Term Performance in Oil and Gas Exploration and Production

Parker Hannifin has recently launched a new range of small-bore subsea ball valves and subsea needle valves for leak-free and reliable, long-term performance in subsea applications up to 10,000 PSI (689 bar) and depths down to 3,050 m (10,000 ft).

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…