Hammond Manufacturing: Type 4, 4X Mild Steel and Stainless Steel Consolet

PBUS-29-Hammond-4XSteelConsolet-400.jpg

July 13, 2021

Introducing the Type 4 4X mild steel and stainless steel consolet series, which serves as an economical housing for operator interface applications, provides an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials, and provides panel mounting capabilities for a variety of applications. Generally used as a stand alone enclosures, it is possible to put side by side with a base on a single plinth (for example, a 36″ wide consolet with a 24″ base with terminal will altogether fit on a 60″ plinth). Optional casters, requiring a plinth, allow for a completely mobile, NEMA rated work station, and the consolet series feature smooth lines and clean edges which provide an attractive, contemporary appearance.

Standards

  •    –   UL 508A Type 3R, 4,12 (Stainless Steel, add 4X)
  •    –   CSA Type 3R, 4, 12, 13 (Stainless Steel, add 4X)
  •    –   EIA RS-310-E
  •    –   Complies with
    •       –   NEMA Type 3R, 4, 12 (Stainless Steel, add 4X)
    •       –   IEC 60529, IP66


Construction

  •    –   Formed 14 gauge steel bodies with 14 gauge steel door and lid.
  •    –   Also offered with formed 14 gauge 304 stainless steel bodies with 14 gauge 304 stainless steel door and lid.
  •    –   Smooth, continuously welded seams without knockouts or holes.
  •    –   Body stiffeners are provided where required for increased strength and rigidity.
  •    –   Offered in 4 widths 24″, 36″, 48″ and 60″.
  •    –   Has solid sides and back, solid door on front, 3 point adjustable lid on sloped (20°) top, and closed bottom with removable access panel.
  •    –   24″ and 36″ widths have single door on the front whereas 48″ and 60″ widths have two outside hinged doors on the front.
  •    –   Doors can be hinged from either side on 24″ and 36″ units.
  •    –   Door profiles provide increased strength and are pre-punched to provide mounting options.
  •    –   Formed lip on enclosure excludes flowing liquids and contaminants.
  •    –   Slotted quarter turn oil-tight latches secure the door and lid, with optional tamper resistant and locking latches available.
  •    –   Stainless steel models utilize stainless steel hardware.
  •    –   Oil resistant gaskets are permanently secured.
  •    –   Features internal stud locations for mounting optional inner panel.
  •    –   A bonding screw is provided on the door and a grounding stud is provided in the enclosure.


Finish

  •    –   Available in RAL 7035 light gray textured powder coating and natural stainless steel with a smooth, brushed finish.

Source

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…