Phoenix Contact: Measuring Transducer Terminal Blocks With Push-in Connection at the Side

PB-47-Phoenix-PTVME-400.jpg

July 14, 2021

The PTVME test-disconnect terminal blocks from Phoenix Contact are an extension to the PTV portfolio. They can be used in all applications on the secondary wiring side of switching devices for transducers and signals.

Simplify your system modernization with the vertical Push-in connection of test-disconnect terminal blocks. With their compact design, PTVME terminal blocks enable you to use an overall width equal to that of screw terminal blocks. Increased safety is ensured thanks to a nominal voltage of 1,000 V. You use the screw-free disconnect slide to actuate the terminal blocks quickly and easily. The switching state can be clearly identified. Since the test-disconnect terminal blocks have the conductor connection at the side, you can connect conductor cross-sections from 0.5 mm² to 6 mm².

You can choose between terminal blocks with integrated or optional test sockets. CLIPLINE complete standard accessories can also be used with these terminal blocks.

Source

Related Articles

Hammond Manufacturing: Eclipse Series Type 4 Mild Steel Wallmount Enclosure

Hammond Manufacturing: Eclipse Series Type 4 Mild Steel Wallmount Enclosure

Introducing Hammond Manufacturing’s Eclipse Series type 4 mild steel wallmount enclosure, designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications. These enclosures have impressive styling features like hidden hinges, attractive latching systems that make the Eclipse a suitable addition to any high-tech equipment installation, and comes in a wide range of sizes and practical accessories which make this product line a complete package.

PB-63-Littelfuse-KnowledgeCenter-400.jpg

New Littelfuse Knowledge Center Helps Customers Prevent Ground-Fault Hazards

Littelfuse, Inc. introduces a new ground-fault knowledge center for engineers, electricians, maintenance workers, and others to create a safer electrical environment. The resource portal provides educational material including defining ground faults, explaining misconceptions, and offering solutions on how to prevent ground-faults.

 

 

 

NCC Connectors Suit Applications With Restricted Space and Offer High Protection Levels When Connected and Disconnected

NCC Connectors Suit Applications With Restricted Space and Offer High Protection Levels When Connected and Disconnected

The Series 670 NCC Subminiature Connectors expand the binder product range with a system for applications with restricted space. The newly developed products target the growing need for suitable, reliable circular connectors in many applications including lighting and test and measurement instrumentation.

 

 

 

New CB10 As-Interface Module Combines Proven Features With Safety Function

New CB10 As-Interface Module Combines Proven Features With Safety Function

AS-Interface has long proven itself as a user-friendly and cost-effective wiring technology for the industrial sector. To increase the variety of available components and expand the range of possible applications, Pepperl+Fuchs has developed two new CB10 series modules: One for connecting 3-wire sensors with their own power supply to an AS-Interface network, and another module with SIL 3/PL e certification for integrating emergency stop buttons into control boxes.

 

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…