Phoenix Contact: Lightning Current Protection for 4-Conductor Systems

July 19, 2021

With the TERMITRAB complete product family from Phoenix Contact, they provide you with the narrowest surge protection for measurement and control technology.

With immediate effect, the TTC-6P-4… protective devices for 4-conductor applications can also be used for applications that require test class D1.

This applies both for product variants with Push-in connection technology and for products with screw connection. Your advantage: use TTC-6P-4… at building transitions. Curve-shaped lightning pulses (10/350) µs can be expected here. The components installed in the protective circuit pass the tests of min. 500 A discharge surge current, which is required for test class D1. Alongside the advantage of a very narrow overall width (only 6 mm for a 4-conductor device), you now get higher-performance protection for your applications.

Source

Related Articles

Finder: Thermostats and Hygrostats – Climate Control for Electrical Panels

Finder: Thermostats and Hygrostats – Climate Control for Electrical Panels

The conditions inside an electrical panel must be such as to preserve the reliability of the equipment contained within it. The correct thermal analysis and thermal management of a panel is one of the most important actions for guaranteeing performance and reliability over time, as well as for compliance with the relevant regulations.

 

 

 

HARTING: Han-Modular – New Shielded Module and an M12 solution

HARTING: Han-Modular – New Shielded Module and an M12 solution

With the new Han Shielded Power Module, users can for the first time make the connection of shielded power cables both modular and mateable. Also new to the Han-Modular portfolio is an M12 solution for mechanical engineering and transportation applications, as well as the Han DD double module. From the latter, space-saving interfaces can be created e.g. in robotics and automation that enable shorter assembly times.

 

 

 

Omron

Omron Introduces New NX-Series Safety Network Controller – World’s First to Support Two Industrial Safety Networks

 

Industry-leading automation solutions provider Omron Automation Americas recently developed a new safety controller featuring both CIP Safety and Safety over EtherCAT. As the maker of the world’s first controller supporting both protocols, Omron can now address 40% of the safety network needs of the global market.

 

 

POSITAL: NEXTGEN IXARC, a New Generation of Absolute Encoders

POSITAL: NEXTGEN IXARC, a New Generation of Absolute Encoders

As part of its ambitious NEXTGEN initiative, encoder-maker POSITAL has introduced a major update to its portfolio of IXARC magnetic encoders. While incremental encoders based on the new technology platform have been available for several months, the company is now rolling out a new generation of single and multiturn absolute encoders. These new encoders come with improved performance (up to 18-bit resolution), improved energy efficiency, and an optimized Wiegand package featuring a newly developed ASIC that functions as the logic controller for the battery-less multiturn system.

Changing Scene

  • Spartan Controls Partners with Northwestern Polytechnic to Empower the Next Generation of Engineers

    Spartan Controls Partners with Northwestern Polytechnic to Empower the Next Generation of Engineers

    Spartan Controls is proud to announce a 15-year partnership with Northwestern Polytechnic (NWP) as the exclusive naming sponsor for the institution’s new $16 million, full-service training and education space. The facility, set to open in summer 2025, will be named the Spartan Controls Northwestern Centre for Industrial Automation & Innovation. Read More…

  • Convergix: Tarriff Communication

    Convergix: Tarriff Communication

    Convergix Announces Tarriff Mitigation Plan. With the recent news regarding tariffs affecting trade between Mexico, Canada, China, and the U.S., and the indication of tariffs being imposed on the U.S. by Canada and Mexico, we want to take a moment to share the steps Convergix is taking to minimize any potential impact on our customers.… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • HELUKABEL: Q & A With HELU – Cable Solutions for Glass Manufacturing

    HELUKABEL: Q & A With HELU – Cable Solutions for Glass Manufacturing

    HELUKABEL Provides Insights Regarding Cable Solutions in Glass Manufacturing. In the glass manufacturing industry, various types of cables play essential roles in powering equipment, monitoring temperatures, and ensuring safe, efficient operations. Due to the high temperatures, heavy machinery, and automation involved in glass production, specialized cables are required to withstand extreme conditions, transmit data reliably,… Read More…

  • Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga

    Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga

    Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga. This intensive five-day course is designed for designers, developers, maintenance engineers, and safety officers seeking to enhance their expertise in functional safety. Participants will gain in-depth knowledge and practical skills to implement functional safety measures throughout the entire CE process in compliance… Read More…