SurgePure Mach 6 SPD System

Mach 6 SurgePure

September 21, 2021

The SurgePure Mach 6 is designed for the largest industrial service entrances and lightning prone locations. With over 2 million amps of solid surge capacity the Mach 6 is good for primary service entrances rated up to 4MW systems.

The Mach 6 SPD System is primary level, two stage, ‘Quad-Mode’ surge protection located at your service entrance.

From the main distribution panel it isolates your sensitive downline equipment from nearby switching motor loads and in-house surges to provide a complete grid of non-degrading surge protection. SurgePure always preserves your assets and maximizes your long-term reliability and profits!

Go HERE for product specifications.

Source

Related Articles

Phoenix Contact: Combi Plug-in Terminal Blocks with System

Phoenix Contact: Combi Plug-in Terminal Blocks with System

The Combi plug-in terminal blocks from Phoenix Contact have a standardized plug-in zone. They therefore offer simple, time-saving wiring. New for the proven, uniform plug-in zone are the LP Combi connectors with lever Push-in Technology for the easy integration of preassembled conductors. Different conductor types with and without ferrules can be connected. The lever Push-in Technology enables easy and effortless one-handed connector operation. Thanks to the versatile locking accessories, the contact system can withstand even strong vibration levels.

IDEC: Compact XA/XW Emergency Stop Switches Enable Improved Safety for Demanding Applications

IDEC: Compact XA/XW Emergency Stop Switches Enable Improved Safety for Demanding Applications

IDEC Corporation has expanded their line of emergency stop (E-stop) switches with new XA/XW series short body models. These industrial-grade and outdoor-rated models are designed in the space-saving size essential for robotic and industrial equipment applications, with innovative features to meet the increased requirements of international safety standards.

Mouser: Bel Power Solutions LET480 DIN Rail Power Supplies

Mouser: Bel Power Solutions LET480 DIN Rail Power Supplies

Bel Power Solutions LET480 DIN Rail Power Supplies are 3-phase AC-DC power supplies with a 480W maximum output power rating and 24V, 36V, and 48V output voltage options. These power supplies feature high efficiency, high reliability, and a 150% power reserve, ensuring there is enough to support starting DC motors or capacitive loads. LET480 power supplies offer good EMC performance and are compliant with EMC standards EN 55032 and EN 55035. Bel Power Solutions LET480 DIN Rail Power Supplies are suitable is areas of industrial control equipment, factory automation, and mechanical and electrical equipment.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…