Type 4X Stainless Steel Junction Box C4XSC Series from Hammond Manufacturing

DCS Type 4X Steel Junction Box C4XSC Series from Hammond Manufacturing 1 400x274

October 12, 2022

Application

  • •Designed for use as a wiring box, junction box, terminal or pull box in indoor or outdoor applications where subject to hose down/precipitation or corrosion.

Standards

  • •UL 508A Listed; Type 3, 4X, 12
  • •cULus Listed per CSA C22.2 No 94; Type 3, 4X, 12
  • •Complies with
    • •NEMA Type 3, 4X and 12
    • •IEC 60529, IP66

Construction

  • •14 gauge 304 stainless steel body up to 12″x12″; 12 gauge body when 30″x30″ or larger
  • •14 gauge 304 stainless steel cover up to 24″x24″; 10 gauge cover when 16″x16″ or larger
  • •Smooth, continuously welded seams without knockouts, cutouts, or holes
  • •Captivated stainless steel cover screws thread into sealed wells
  • •Seamless poured-in place gasket

Finish

  • •Enclosure and cover are unpainted, with a grained #4 finish.

To learn more about the new mild steel junction boxes from Hammond Manufacturing, click here 

Related Articles

Rittal: New Blue e+ S Cooling Units Enhances Efficiency and Sustainability
|

Rittal: New Blue e+ S Cooling Units Enhances Efficiency and Sustainability

The push towards sustainable manufacturing is driving the need for efficient enclosure cooling units, especially in industries like automotive where consistent cooling is crucial. The challenge lies in maintaining necessary cooling outputs while adhering to eco-friendly standards. Rittal’s Blue e+ line has set a benchmark in industrial cooling. The new Blue e+ S takes it further with precise cooling, a smaller footprint, and greater energy savings.

Posital

POSITAL Upgrades its Family of Analog Programmable Rotary Encoders

 

Encoder specialist POSITAL has announced a new generation of analog rotary encoders for position control. Compared to the company’s earlier analog encoders, these new models feature improved accuracy, faster dynamic response and new programming options. They also accept a wider range of supply voltages, an advantage for mobile machinery applications.

 

 

Comau Unveils “MI.RA/PICKER”, a Fully Automated Perception-Based Random Bin Picking Solution

Comau Unveils “MI.RA/PICKER”, a Fully Automated Perception-Based Random Bin Picking Solution

Comau introduces “MI.RA/PICKER”, an intelligent advanced automation solution for perception-based random bin picking. Adaptable to any brand of commercial robot, customized bin or customized gripper, the fully automated picking solution uses two highresolution laser sensors and a central camera to autonomously recognize, locate and grasp randomly placed objects at a rate of up to 40 pieces per minute (PPM).

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…