Hammond Manufacturing: Type 1 Galvanized Lay-In Wireway CWG Series

November 22, 2022

Application  

  •    –   Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.

Standards  

  •    –   UL-50 Type 1
  •    –   cUL Type 1
  •    –   Complies with
    •       –   IEC 60529, IP20

Construction  

  •    –   Formed from 16 or 14 gauge unpainted G90 galvanized steel
  •    –   Flat covers have keyhole screw slots
  •    –   Straight sections are offered with/without adequate concentric knockouts (1/2″, 3/4″ conduit size)
  •    –   Unobstructed interior speeds up laying of cables
  •    –   Optional hanger brackets allow for vertical or horizontal mounting
  •    –   Joiners sold separately

Finish

  •    –   Sections, components, and couplings are unpainted galvanized

Source

Related Articles

Endress+Hauser: New 2DS Ex-i Specialty Transmitter Module

Endress+Hauser: New 2DS Ex-i Specialty Transmitter Module

With the launch of a new speciality transmitter module, Endress+Hauser is simplifying the connection of Memosens sensors located in designated hazardous areas of a facility to a PLC or other controller. The intrinsically-safe sensor input modules (2DS Ex-i) slot into a CM44x series Liquiline multichannel controller, which transmits the received sensor data onward to the PLC.

Omron’s Harsh Washdown Solutions Help Avoid Contamination Without Sacrificing Equipment Longevity

Omron’s Harsh Washdown Solutions Help Avoid Contamination Without Sacrificing Equipment Longevity

Food and beverage product contamination can happen in a couple of ways. Organisms in the product itself can be spread by equipment that hasn’t been cleaned properly, while employees can also transfer germs to product. For this reason, it’s essential for processing to occur in a washdown environment.

 

 

 

New Cylinder Becomes Seventh Member of Festo’s Simplified Motion Series

New Cylinder Becomes Seventh Member of Festo’s Simplified Motion Series

And then there were seven. The EPCE electric cylinder has become the seventh member of Festo’s Simplified Motion Series (SMS), a family of electric actuators that mimics the simplicity of pneumatics in performing simple point-to-point movements or positioning tasks. Each has an integrated servo drive, controller and electronics, and two on-board control options as standard: Digital I/O and IO-Link.

 

 

 

EXAIR: 1/8 NPT HollowStream Hollow Cone Liquid Nozzle for Cooling and Washing

EXAIR: 1/8 NPT HollowStream Hollow Cone Liquid Nozzle for Cooling and Washing

EXAIR’s new 1/8 NPT HollowStream liquid atomizing spray nozzle is the latest addition to EXAIR’s line of Liquid Atomizing Nozzle. Providing a hollow cone spray pattern, the HollowStream features a tangential flow design is vaneless, with wide open internal features to resist clogging while producing a uniform distribution in a ring pattern with medium to large droplets to solve cooling, cleaning, foam breaking, rinsing and dust suppression applications for industry.

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…