Hammond Manufacturing: Eclipse Series Type 4 Mild Steel Wallmount Enclosure

October 26, 2023

Introducing Hammond Manufacturing’s Eclipse Series type 4 mild steel wallmount enclosure, designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications. These enclosures have impressive styling features like hidden hinges and attractive latching systems that make the Eclipse a suitable addition to any high-tech equipment installation, and come in a wide range of sizes and practical accessories which make this product line a complete package.

Eclipse Series Standards

  • UL 508A Type 3R, 4, and 12
  • CSA Type 3R, 4, and 12
    • Mounting foot kit required to maintain UL/CSA external mounting requirements.
  • Complies with
    • IEC 60529, IP66NEMA Type 3R, 4, and 12

Eclipse Series Construction

  • Formed 14 (24×24″ and larger) or 16 (24×20″ and smaller) gauge steel.
  • Smooth, continuously welded seams ground smooth.
  • Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
  • Formed lip on enclosure to exclude flowing liquids and contaminants.
  • Door latching: Type A has slotted quarter turns, Type B has handle with 3 point latching, Type C has handle with 3 point latching plus additional quarter turns top and bottom.
  • Doors may be easily removed for modifications and are interchangeable.
  • Seamless poured-in place gasket.
  • Collar studs provided for mounting inner panel.
  • Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
  • Bonding stud provided on door and grounding stud installed in enclosure.
  • Hinges are constructed from 304 stainless steel.
  • Hinge pins are stainless steel.
  • Quarter turn latch and multi-point handle (key lockable) are zinc diecast with black epoxy finish.
  • Door alignment guide provided on 36″ wide enclosures.
  • Door swing can be reversed – requires ordering adapter kit EHLLSAK (for EN4SD72* enclosures, 2 adapter kits required).

Finish

  • Cover and enclosure are phosphatized and finished with a recoatable powder inside and out with choice of ANSI 61 smooth Gray (GY) or RAL7035 textured light gray (LG).

Source

Related Articles

PBSI Otto Motors Software Releaes Gives Unparalled Visibility 1 400

OTTO Motors Software Release Gives Unparalleled Visibility Into Fleet Performance of Autonomous Mobile Robots

 

OTTO Motors, a leading provider of autonomous mobile robots (AMRs), released software recently, giving customers better visibility and depth of their fleet’s performance in a continued commitment to support the world’s largest AMR deployments. 

 

Sealed 2+2 Jaw Chuck With Large Compensation Stroke Allows Maximum Flexibility on Mill/Turn Machines

Sealed 2+2 Jaw Chuck With Large Compensation Stroke Allows Maximum Flexibility on Mill/Turn Machines

To meet the increasing demands of the market, SCHUNK has developed the low-maintenance 2+2 jaw chuck SCHUNK ROTA-M flex 2+2, which has a particularly large compensation stroke by virtue of a compensation mechanism (patent pending): Depending on the size, this is between 5.1 mm and 10 mm per jaw – more than with any other 4-jaw chuck on the market.

 

 

 

MENNEKES: Multi-Gang SLPX Disconnects With Sloped-Top Clean Design

MENNEKES: Multi-Gang SLPX Disconnects With Sloped-Top Clean Design

MENNEKES recently expanded its sloped-top motor disconnect offering, allowing you to prioritize sanitation in your plant environment while easily meeting requirements for multiple disconnects. Available in three multi-gang enclosure sizes, the new stainless steel SLPX Series features a unique clean design for critical washdown and processing areas. Like other MENNEKES sloped-top disconnects, these units are UL Listed, rated NEMA 4X and include a 15-degree sloped roof to facilitate liquid runoff. They are also ideally suited for multiple disconnect requirements, saving you cost and time with one box installation versus having many individual units.

Balluff

Balluff’s SmartLight Indicator Delivers Operator Guidance at Most Critical Point

 

Utilizing the power of IO-Link, Balluff has created a visual indicator line capable of directing, instructing and guiding operators in nearly any manufacturing task. The new-to-market indicators increase productivity and minimize workforce errors by providing innovative personnel guidance in a variety of applications…

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…