Mouser: Amphenol Piher MSX-360 Miniature Joystick Position Sensors

June 24, 2024

Amphenol Piher MSX-360 Miniature Joystick Position Sensors pack pro-grade features into a tiny 14.4mm x 16mm footprint.

Despite a lightweight build, the sensors deliver precise control with a full 360° range with no dead zones, 12-bit resolution for smooth response, and long-lasting durability. Built to resist electromagnetic interference and electrostatic discharge, the MSX-360 position sensors provide reliable operation.

The Amphenol Piher MSX-360 Miniature Joystick Position Sensors are a low-profile and long-life cost-effective alternative to contacting solutions based on printed carbon tracks or potentiometers prone to wear and tear during the lifespan.

FEATURES

  • True, contactless operation
    • Without any gears or mechanical interfaces, the sensor is easily assembled and calibrated
    • Subject to limited wear and tear over the lifetime
  • With ultra-small weight and packaging space, this rotary sensor can be used in even the most space-constrained applications
  • A magnet is securely fastened to the integrated shaft and acts as the only moving component in the sensor
  • 360° absolute position feedback enables endless mechanical rotational angle without a dead band and keeps the position on power loss with programmable electrical angles from 90° to 360°
  • Analog (ratiometric) output protocol
  • Self-diagnostic features
  • IP67 sealing
  • RoHS and REACH compliant

APPLICATIONS

  • HMI interfaces
  • Medical joysticks
  • Industrial joysticks
  • Radio remote controls
  • Throttle controls
  • Lever control arms
  • Valve positions

SPECIFICATIONS

  • Up to 7x million cycles rotational life
  • 360° (endless rotation) mechanical range
  • 5.9mm shaft diameter
  • 1Nm maximum mounting torque
  • ±1.5% absolute linearity
  • 90°, 180º, 270º, and 360° electrical angular range
  • Up to 12-bit resolution
  • 5V ±10% supply voltage
  • 12.6mA typical supply current
  • +20V/-10V voltage protection
  • -40°C to +125°C operating temperature range

Source

Related Articles

HARTING: Han Rear-Fit – Quick installation of interfaces inside the switch cabinet

HARTING: Han Rear-Fit – Quick installation of interfaces inside the switch cabinet

In addition to solutions in the Han B and Han-Eco B standards, rear-mountable interfaces for trouble-free data transmission will also be available as of Q1 2020 — the Han B/EMC Rear-Fit. Simplified handling speeds up the processing of equipping control cabinets with interfaces and thus offers interesting options to manufacturers of robotics and automation technology.

 

 

 

Carlo Gavazzi: Solid State Relays and Contactors with Integrated Monitoring

Carlo Gavazzi: Solid State Relays and Contactors with Integrated Monitoring

Carlo Gavazzi is pleased to announce the launch of our new RG..M Series of single-phase solid state relays and contactors with integrated monitoring features. The RG..M consists of solid state switches that integrate monitoring features for quick and timely failure detection, besides the switching function.

 

 

 

Yaskawa Smart Series Product Line is Ideal for New Robot Users: Enables Fast and Easy Implementation of a Robot System

Yaskawa Smart Series Product Line is Ideal for New Robot Users: Enables Fast and Easy Implementation of a Robot System

Introduced specifically for manufacturers branching out into robotics, the new Smart Series suite of products allows quick and easy implementation of a robot system. The Smart Series product line includes Yaskawa’s HC10DT, MotoMini, GP7, GP8 and GP12 robots as well as the Smart Pendant and the YRC1000micro robot controller.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Enhancing Food and Beverage Manufacturing with Motion Control

    Enhancing Food and Beverage Manufacturing with Motion Control

    Reliability in automation motion control is crucial for original equipment manufacturers (OEMs), directly influencing machine efficiency and production costs. Key factors such as servo position accuracy, trajectory repeatability, and system efficiency are essential for maintaining high performance and competitiveness. OEMs must balance the addition of advanced features with profitability, ensuring their equipment meets customer expectations… Read More…

  • How to Choose the Right Disconnect Switch

    How to Choose the Right Disconnect Switch

    When it comes to electrical safety, a disconnect switch is essential for protecting people and equipment. This gadget lets you to swiftly and simply turn off power in an emergency or during maintenance, resulting in a safer work environment. Understanding how disconnect switches work will help you make more educated decisions regarding your electrical systems. Read More…