nVent Hoffman: HN 3R Side-Mount Filter Fans

February 28, 2024

Introducing the HN 3R Side-Mount Filter Fans from nVent Hoffman. HN 3R Side-Mount Filter Fans quickly install into enclosures with a click-fit design; no tools or screws required, and the grilles open with the flick of a finger for easy filter replacement. There is a reverse airflow option on items ending with “R” available to push/pull air through higher static pressure, and a standard rope gasket provides a proper seal to the enclosure, as well as similar cut-out sizes as other filter fan manufacturers.

More HN 3R Features & Benefits

  • Enclosure side wall mounting
  • Terminal block connections
  • Optional thermostat available to save energy and extend service life
  • Hinged grille remains attached after opening
  • Size range from 4 in. (102 mm) to 12 in. (305 mm)
  • Service life hours from 40,000 to 98,000 hours

Source

Related Articles

Polycase: New IP-Rated HP Series Enclosures

Polycase: New IP-Rated HP Series Enclosures

The goal for Polycase was to provide a cost-effective solution for outdoor applications that require waterproof protection, without compromising quality. Listening to what customers value most, the team at Polycase designed the HP Series – prioritizing the essentials needed like a continuous gasket and waterproof ratings while forgoing some of the enhancements you would find on Polycase’s other NEMA lines, such as the ZH Series.

IDEC: BTBH-H easy-stack Terminal Blocks Provide Flexible Wire Termination Option

IDEC: BTBH-H easy-stack Terminal Blocks Provide Flexible Wire Termination Option

IDEC Corporation announces the new BTBH-H easy-stack product line of surface mount terminal blocks in a compact form factor with multiple amp ratings. These terminal blocks can be easily stacked together or ordered preassembled to meet the needs of any commercial or industrial application. BTBH-H blocks are available in four different amp ratings—10A, 15A, 30A, and 50A—and can be ordered as individual components, or as complete assemblies by amp rating for 2 to 30 poles.

AcuAmp Current/Voltage Transducers and Switches Line Extension from AutomationDirect

AcuAmp Current/Voltage Transducers and Switches Line Extension from AutomationDirect

More transducers and switches have been added to the AutomationDirect sensors lineup. ATCH series adaptive true RMS current transducers ($169.00) are designed to monitor electric heat zero-crossing burst fired SCR controllers. These transducers provide faster response than temperature sensors and are a simplified method to monitor pulsed waveforms and are ideal for electrical heater applications.

 

 

 

Rockwell Automation

New Field Controller Provides Simplified, Cost-Effective Solution for DC Retrofit Applications

 

The new Allen-Bradley PowerFlex DC field controller from Rockwell Automation enables customers to upgrade their DC motor application to a modern system, without the need for complex external devices. An up-to-date digital networked control system helps customers gather and leverage vital information throughout their enterprise.

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…