A compact powerhouse meets the highest safety requirements: The new generation of the KMP 600-S diffDrive expands KUKA’s portfolio of mobile platforms. The KMP 600-S diffDrive is fast – up to two meters per second – and equally safe, thanks to laser scanners and 3D object detection.
SICK has come out with the AS30 sensor arrays. Array sensors operate on the proximity scanning principle. They detect even the smallest edges based on differences in grayscale values within the field-of-view. Positioning of, for example, a paper web based on the web edge or a contrast line is only one of many possible applications. Widths, diameters, and gaps can also be detected. In reflector mode, the array sensors can even detect transparent materials.
Introducing the Inside BNC 90 degree Compression Connectors from Ideal. Installing one-piece compression BNC and right angle connectors just got easier. No more uncertainty when inserting the cable into the connector. No more collapsed center pins. No more wasted connectors and rework time on the job. With the patented InSITE Technology feature, now standard on all IDEAL BNC and right angle (90°) compression connectors, field termination of these blind entry connectors is simpler, faster and now provides a higher performance connection for all applications from CCTV to HD Video.
Introducing the MPZ gripper from Schunk, a small 3-finger centric gripper with base jaws guided on T-slots. The T-slot guidance allows for precise gripping at high moment loads. An air supply via hose-free direct or screw connections allow for a flexible pressure supply in all automated systems. The compact dimensions of the gripper provide minimally interfering contours for handling.
CENELEC standards, Machinery Safety Directive, CE conformity… Pilz has perspective in this standards’ jungle. They provide support, from project planning and programming through to documentation and the approvals process. As for drawing up compliant technical documentation for the authorities – you can leave that to Pilz as well. For this purpose, Pilz has tailored their machinery safety and automation services to the railway.
OTTO Motors has recently unveiled its newest AMR, OTTO 600, the toughest and most nimble AMR in its class. With the launch of OTTO 600, OTTO Motors offers an incredibly comprehensive autonomous material handling fleet to the market. OTTO 600 unlocks important new workflows with its ability to move pallets, carts and other payloads up to 600 kg (1,322 lb). With an all-metal construction and IP54 rating, OTTO 600 follows the OTTO Motors legacy of AMRs built to deliver results in the most demanding of factory environments.
AutomationDirect announces the addition of IDEM two-hand safety control panels to their safety products portfolio. Two-hand safety control panels, used with a special control monitoring relay, require an operator to use both hands simultaneously during a hazardous operation. This forces operators to keep their hands on the two-hand control actuator and out of harm’s way. New IDEM products include a control station with momentary pushbuttons, a control station with zero-force touch buttons, and an empty two-hand control station enclosure for custom configurations. Enclosures are made of die-cast aluminum; replacement buttons are available.
Siemens has developed an innovative enclosed line of motor starters using the SIRIUS product family, placing the most advanced motor control technology “in a box.” To compliment their long standing “V” series made-to-order SIRIUS Motor Starters, the 3RE41 line offers a modular approach to ordering and configuring enclosed motor starters. SIRIUS 3RE4 offers a wide selection of enclosed motor starter packages, contactors installed in NEMA 1 enclosures, which can be converted to 3-phase or 1-phase motor starters with the addition of an overload relay.
With its ERT series, SCHUNK offers rotary units that are characterized by a particularly flat design and enable precise, flexible, and highly dynamic rotational movements. The unit can be used as a rotary table for components, assembly groups and tools, and can also be used as a rotary module in gantry solutions, as a rotary indexing table or a high-precision positioning module. The direct drive by a permanently excited torque motor ensures precise, highly dynamic movements.
Rittal has revolutionized the field of non-metallic enclosures with the AX Fibreglass Reinforced Polyester enclosure. They provide maximum simplification, speed and configuration freedom, while meeting the highest demands in terms of safety and robustness. Installed indoors or completely exposed to the weather outdoors – these enclosure will safely protect your electrical components.
Announcing the launch of a new series of low profile, baseplate cooled 160W AC-DC power solutions. The new units are intended for use in semi-conductor manufacturing and industrial technology applications including test and measurement, factory automation and process control, with a focus on solving cooling, air pollution and integration issues. The new ASB160 series are compact and complete AC-DC power supplies that include an EMC filter, AC fuse and bulk storage capacitor.
Fully automatic wiring processing goes one stage further. Rittal presents its Wire Terminal WT C5 and C10 innovations that allow wire processing at speeds ten times faster than by hand. Due to the modular system design and numerous option packages, panel builders and switchgear manufacturers now have a future-oriented automation solution. You can start with a small version and then adapt and expand it individually in terms of software and hardware as your needs grow. In addition, users are given a cross-process solution thanks to complete network-ing, ranging from electrical engineering to produc-tion.
AutomationDirect has added new Murrelektronik surge suppression devices that help protect and lengthen the life of motors, contactors, relays, solenoids, and PLC outputs. These new surge suppression devices support a variety of applications and provide protection from voltage spikes and electromagnetic noise caused by inductive loads. New additions include universal surge suppressors that reduce high voltage spikes created when contactor coils are de-energized, motor surge suppressors that protect 3-phase motors from the damaging effects of line surges, and valve surge suppressors that mount between the valve base and valve plug to protect against damage caused by voltage spikes from solenoid coils.
Moxa has recently introduced its AWK Series, a new lineup of next-generation industrial wireless networking solutions offering 802.11ac Gigabit Wi-Fi, IEC 62443-4-2 SL2 certified* security, and dual-band Turbo Roaming™ for unmatched wireless reliability and availability. When combined, these advanced features meet the current and future demands of applications where Autonomous Guided Vehicles (AGVs) and Autonomous Mobile Robots (AMRs) are at the heart of boosting productivity and operational safety, such as mobile automation and IP surveillance in mining, manufacturing, healthcare, and transportation, among others.
Maximize your machine’s performance: Performing precise linear motor drive control and nanoscale positioning, the PMAC (Programmable Multi Axis Controller) has been appreciated by manufacturers of semiconductor manufacturing equipment and other cutting-edge equipment. Omron now offers a next generation motion controller CK3M that packs PMAC’s superior motion control capability, multi-vendor connectivity, and flexible development capability into its compact design. The CK3M removes constraints and barriers and maximizes your machine’s capabilities.
Kinova is pleased to announce the introduction of Kinova Kortex API version 3.2 for their collaborative industrial robot, Link 6! This new version includes a host of new features, enhanced stability, and overall performance improvements. They have been working hard to ensure that this update provides their users with the greatest possible experience. In this article, they take a deeper look at some of the new features and enhancements in version 3.2. They also provide some tips on how to get the most out of the new version by utilising a variety of new or updated plugins.
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
