Phoenix Contact: Combi Plug-in Terminal Blocks with System

June 2, 2023

The Combi plug-in terminal blocks from Phoenix Contact have a standardized plug-in zone.

They therefore offer simple, time-saving wiring. New for the proven, uniform plug-in zone are the LP Combi connectors with lever Push-in Technology for the easy integration of preassembled conductors.

Different conductor types with and without ferrules can be connected. The lever Push-in Technology enables easy and effortless one-handed connector operation. Thanks to the versatile locking accessories, the contact system can withstand even strong vibration levels. The product portfolio includes preassembled connectors with up to 15 positions in a nominal cross-section of 2.5 mm². The individually configurable connectors provide a high level of flexibility. The versions for self-assembly support modular configuration for individual applications.

Source

Related Articles

Bel Power Solutions TCP4000 Series Fanless 4 kW Power Supply Offers Wide Adjustable Output

Bel Power Solutions TCP4000 Series Fanless 4 kW Power Supply Offers Wide Adjustable Output

Bel Power Solutions has recently announced the TCP4000 Series of fanless, three-phase 4000 W AC-DC converters, suitable for a variety of industrial applications, including semiconductor lasers and plasma generators, as well as process and control applications. The TCP4000 Series converts worldwide three-phase input voltage (180 – 528 Vac) to an adjustable low voltage, from 30-100 Vdc, optimized at 90 V, which is ideal for semiconductor lasers.

 

 

 

Murrelektronik: Emparro Premium Power

Murrelektronik: Emparro Premium Power

Murrelektronik’s Emparro switch mode power supply units’ efficiency rate of up to 95% is impressive. A higher efficiency rating equals minimum power loss, which equals reduced operating costs. Emparro’s lower operating temperature ensures that the device, and the components installed around it, will not be as affected by heat build up in the cabinet. Therefore, control cabinets with smaller dimensions can be used.

More Efficient Wire Processing
|

More Efficient Wire Processing

Optimized Processes and Coordinated System Solutions for Greater Efficiency in Wire Processing – Control cabinet builders face many challenges: international competition, the shortage of skilled workers, and financial considerations such as increasing labor and material costs. While panel shops have little influence over these external challenges, they can find ways to streamline in-house processes and structures. Due to the sheer number and variety of manual activities performed, the process chain in control cabinet building offers significant potential for efficiency gains, both in engineering and production. Panel builders can achieve more efficient and economical processes by implementing more coordinated systems.

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…