Weidmuller: PLC and DCS Migration with MiBridge

July 25, 2024

From the old to the new control system with minimised downtime

When industrial plants age, are no longer state of the art, or when support or spare parts availability is limited, a system update is required at the control level of a process plant. When replacing PLC and DCS systems, it is essential to avoid wiring errors and to keep the downtime of the plant as low as possible during the migration process. PLC or DCS migration with MiBridge from Weidmüller enables a secure exchange of the control level. Even adaptations or changes to the infrastructure can be performed simply and quickly without any need to intervene the field cabling.

Uniquely designed solution

The design permits your existing field wiring to remain in place and eliminates the need to wire-trace or ring-out.

Compatibility means flexibility

Universal conversion/migration system for the most important PLC old systems, to migrate to any new control system.

Minimal components maximise migration efficiency

Includes versions of card adaptors and cable types to accommodate flying leads or pre-wired field connections.

Convenient PLC and DCS migration within a few hours

PLC or DCS migration with Weidmuller’s new migration interfaces does not require any additional space in the control cabinet. The rack system takes the place of the old controller and combines the connection level and the new controller into one compact unit. All connection components are easily accessible by simply folding down the upper level.

Your advantages with MiBridge
  • No additional space required in the control cabinet
  • Lower level: connection of the existing pre-assembled cables to the new adapters
  • Upper level: Installation of the PLC / DCS components
  • Pre-assembled interface cables connect the adapter cards with the new control system
  • The correct retrofitting components for each PLC or DCS

Source

Related Articles

Pilz: Security on Board Automated Guided Vehicle Systems

Pilz: Security on Board Automated Guided Vehicle Systems

Freely navigating automated guided vehicle systems (AGVS) in production halls communicate with their control station wirelessly. That means they are susceptible to attacks or tampering from outside. Map data can be queried; in the worst case, the AGVS and therefore production can even be halted. In order to protect human and machine, and therefore also industrial security, Pilz has a complete solution for automated guided vehicle systems (AGVS).

IDEC: BTBH-H easy-stack Terminal Blocks Provide Flexible Wire Termination Option

IDEC: BTBH-H easy-stack Terminal Blocks Provide Flexible Wire Termination Option

IDEC Corporation announces the new BTBH-H easy-stack product line of surface mount terminal blocks in a compact form factor with multiple amp ratings. These terminal blocks can be easily stacked together or ordered preassembled to meet the needs of any commercial or industrial application. BTBH-H blocks are available in four different amp ratings—10A, 15A, 30A, and 50A—and can be ordered as individual components, or as complete assemblies by amp rating for 2 to 30 poles.

KUKA: KR IONTEC

KUKA: KR IONTEC

Whether on the floor, on the wall or inclined, the KR IONTEC combines compact design with the largest working envelope in its class for optimal use of space with a small footprint. Equipped with a waterproof and dustproof in-line wrist and protected motors, the robot is suitable for almost every area of application. A Foundry option also enables use in extremely hot environments with an expanded temperature range from 0° to 55°C.

 

 

 

Field and Panel Mount Loop-Powered 4 to 20mA Process Displays from AutomationDirect

Field and Panel Mount Loop-Powered 4 to 20mA Process Displays from AutomationDirect

The ProSense LPM1 series of loop panel meters offers a simple, low cost digital display of an analog 4-20mA signal. Models are available for mounting in a standard 1/8 DIN size panel cut-out with minimal installation depth as well as models provided in an aluminum enclosure for field mounting as a remote display for process instrumentation transmitters. The meter is powered from the mA loop and requires no external power supply.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…